746522

Parkside IAN 288072 PFBS 12 A1 Manual

45
Zoom out
Zoom in
Previous page
1/67
Next page
PFBS 12 A1
■ 42 
│
 GB
│
MT
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Push the ON/OFF switch
to the "OFF"
position.
♦ Insert the battery pack
into the appliance
until it clicks into place.
Removing the battery pack:
♦ Press the two battery release buttons
on
the side of the appliance at the same time and
remove the battery pack .
Checking the battery charge level
If the appliance is switched on, the status/remain-
ing charge will be shown on the battery LED 2 as
follows:
RED / ORANGE / GREEN = maximum charge
RED / ORANGE = medium charge
RED = low charge – charge the battery
Changing/inserting the tool/collet
chuck
♦ Press the spindle lock and hold it down.
♦ Turn the tensioning nut
until the lock clicks
into place.
♦ Undo the tensioning nut
from the thread
using the combination spanner .
♦ Remove any tool which is inserted.
♦ First push the intended tool through the tensioning
nut
before inserting it into the appropriate
collet chuck for the tool shaft.
♦ Press the spindle lock
and hold it down.
♦ Push the collet chuck
into the thread insert
and screw the tensioning nut
tight with the
combination spanner .
NOTE
► Use the screwdriver side of the combination
spanner
to undo and tighten the screw on
the mandrel .
Switching on and off/setting speed
range
Switching on/setting the speed range:
♦ Set the ON/OFF switch with the speed control
to a position between "1" and "MAX".
Switching off:
♦ Set the ON/OFF switch with the speed control
to the "OFF" position .
Notes on working with materials/
tools/speed range
■ Use the milling bits for working on steel and
iron at maximum speed.
■ Determine the rotational speed range for working
on zinc, zinc alloys, aluminium, copper and lead
by trying it out on test pieces.
■ Use a low rotational speed for work on plastics
and materials with a low melting point.
■ Use a high rotational speed for working on
wood.
■ Carry out cleaning, polishing and buffing work
in the medium speed range.
The following are recommendations only and not
binding. When carrying out practical work, carry
out your own tests to see which tool and which
settings are ideal for the material you are working
on.
… 45 …


Need help? Post your question in this forum.

Forumrules
1

Forum

parkside-ian-288072-pfbs-12-a1

Reset search

  • How long does the battery charger take to fully charge? Submitted on 9-3-2021 at 15:27

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 288072 PFBS 12 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 288072 PFBS 12 A1 in the language / languages: English, Italian, Spanish as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 288072 PFBS 12 A1

Parkside IAN 288072 PFBS 12 A1 User Manual - German, Dutch, French - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info