748015
39
Zoom out
Zoom in
Previous page
1/156
Next page
3 9
GB IE
Cleaning
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
Thoroughly clean the device after every
use.
Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.
Servicing
Replacing carbon brushes
Switch off the appliance and dis-
connect the power supply. Let the
appliance cool down.
1. Loosen the screw ( 7) of the mainte-
nance cover ( 6).
2. Remove the maintenance cover ( 6).
3. Lift the compression spring (20) out of
the groove for the spring (22) the car-
bon brush (21).
4. Remove the contact plug (25) of the
contact shoe (24).
5. Pull out the brush (21) from the guide.
6. Insert a new carbon brush (21) into the
guide.
7. Place the connector (23) in a bow in
the groove for the compression spring
(22) past. Lead the connector (23)
through the side opening of the leader-
ship.
8. Slide the contact plug (25) on the con-
tact shoe (24).
9. Replace the compression spring (20)
on the nut of the compression spring
(22) the carbon brush (21).
10. Reattach the screw ( 7) the mainte-
nance cover ( 6)
11. Repeat the procedure 1 to 10 on the
other side of the unit. The carbon bru-
shes are always in pairs to share.
Storage
Store the appliance in a dry place well
out of reach of children.
Grinding discs must be dry and stored
upright and should never be stacked.
Waste disposal
and environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
Electrical machines do not belong
with domestic waste.
Hand over the device at an utilization
location. The plastic and metal parts
employed can be separated out and
thus recycled use can be implemented.
Ask our Service-Center for details.
Defective units returned to us will be
disposed of for free.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 287952 PWS 125 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 287952 PWS 125 D3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info