Manual Parkside IAN 287952 PWS 125 D3 (page 36 of 156) (English, German, Dutch, French, Portuguese, Spanish)

748015

Zoom out

Zoom in

1/156

3 6

GB IE

Mount handgrip

The device must only be

operated with the handgrip

mounted.

Depending on the method of working, tigh-

ten the handgrip ( 1) on to the handgrip

thread on the left ( 8), right (see illustra-

tion ) or top ( 2) of the device.

Assemble/set protective

hood

Adjust the protective hood such that any

sparks or detached parts cannot hit either

the user or any bystanders.

The protective hood must also be positi-

oned such that the sparks cannot ignite

combustible parts, including those in the

surroundings.

1. Press the spindle stop button ( 9).

2. Turn the mounting spindle ( 17) until

the spindle lock xed the mounting

spindle. Keep and continue to hold

down the spindle lock button ( 9)

3. Release the clamping nut ( 16) with

the chuck key ( 13). You can release

the spindle lock button ( 9).

4. Take off the locknut ( 16) and the

adapter ange ( 15) from the spind-

le ange ( 17).

5. Open the tightening lever ( 19).

6. Place the protective hood

(14) on the positioning holes.

7. Turn the protective hood ( 14) into

the working position. The closed side

of the protective hood must always

face the operator.

8. Close the tightening lever ( 19)

again. The protective hood should not

be able to be turned any more.

9. Install the locknut ( 16) and adapter

ange ( 15) in reverse order.

10. Readjust the position of the protective

hood if you nd during use that it does

not provide optimum protection.

If needed, the tension on the adjustment

nut ( 18) can be set. Use the chuck key

(13) for this.

Installing/changing disc

1. Press the spindle stop button (9).

2. Turn the mounting spindle (17) until the

spindle lock xed the mounting spind-

le. Keep and continue to hold down

the spindle lock button (9)

3. Release the clamping nut (16) with the

chuck key (13). You can release the

spindle lock button (9).

4. Set the desired disc onto the moun-

ting ange ( 15). label on the disc

should always face the device.

If the rotary direction is in-

dicated on your disc, ensure

that it corresponds to the

rotary direction of the angle

grinder when mounting. This

is indicated on the device

next to the spindle stop but-

ton (9) ( ).

Ensure that the ange ( 15) is

placed on the device in such a way

that the recesses in the ange grip

into the edge of the device. The

mounting spindle ( 17) must turn

simultaneously when you turn the

ange.

5. Set the clamping nut (16) on the moun-

ting spindel (17) again. The at side of

the clamping nut must face the attach-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 287952 PWS 125 D3 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 287952 PWS 125 D3 Manual

Product: