748017
23
Zoom out
Zoom in
Previous page
1/83
Next page
23 GB/IE
Introduction / Safety instructions
Inverter welder PISG 80 A2
Introduction
Congratulations! You have
chosen a high-quality unit from
our company. Familiarise your-
self with the product before using it for the first time.
In addition, please carefully refer to the instructions
for use and the safety instructions below. Initial op-
eration of this tool must be performed by trained
personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
This welding tool is suitable for welding metals such
as carbon steel, alloy steel, other stainless steels,
copper, aluminium, titanium, etc. The product has a
control lamp, a thermal protection indicator, and a
cooling fan. It further has a strap to safely lift and
move the product. Improper product handling can
be dangerous to persons, animals and objects. Only
use the product as described and for its indicated
purpose. Keep these instructions in a safe place.
When passing this product on to others, please also
include all the documents. Any use other than the
intended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
are not covered by the warranty and are not included
in the manufacturer‘s liability.
Note: Classification per EMV stan dard: Class A
per IEC 60974-10
Warning: Equipment categorised Class A are in-
tended for industrial use. When used in other areas,
electromagnetic tolerance may not be warranted
or failures may occur.
Parts Description
1 Carrying strap
2 Overheating control lamp
3 Control knob
4 Earth terminal
5 Electrode holder
6 Combination wire brush with chipping hammer
7 Welding shield
8 Grip
9 ON / OFF switch
10 Mains lead
Technical Data
Mains connection: 230 V∼ 50 Hz
Max. welding current
and the respective
conventional load voltage: 10 A / 20.4 V–80 A /
23.2 V
Rated value of the
Mains voltage: U1: 230 V
Highest rated value
of the mains current: I1max: 14.3 A
Maximum effective
input current: I1eff: 7.8 A
Rated value of the
no-load voltage: U0: 68 V
Protection class: IP21S
Scope of delivery
1 Inverter welder
1 Welding shield
2 Welding cables
1 Combination wire brush with chipping hammer
1 Carrying strap
1 Instructions for use
Safety instructions
Please carefully read the instructions
for use and follow the specified no-
tices. Familiarise yourself with the
tool, its proper use and the safety
281479_Inverter Schweissgeraet PISG 80 A1_content_OS.indd 23 28.12.16 12:19
11 Protective glass
W eight:
Duty cycle X:
Falling c haracteristic
3,2 kg
30 %
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 286508 PISG 80 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 286508 PISG 80 A2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info