746566
28
Zoom out
Zoom in
Previous page
1/138
Next page
PDFW 120 A1
24 GB
IE
Explanation of the symbols used on the
appliance:
Read all safety warnings
and all instructions!
Read all safety warnings
and all instructions!
Wear safety goggles!
Wear hearing protection!
Wear protective gloves!
Noise emission value:
Noise measurement value determined in accord-
ance with EN ISO 4871. The rated noise level of
the power tool is typically:
Sound pressure level: L
pA
= 74.7 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 87.7 dB (A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Vibration emission value:
Total vibration value (vector total of three directions)
determined in accordance with EN 61029:
Vibration emission value ah ≤ 2.5 m/s
Uncertainty Kh = 1.5 m/s
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
The vibration level varies in accordance with
the use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. To estimate the vibration
load during a specific working period ac-
curately, also take into account periods dur-
ing which the appliance is switched off (or
running, but not being used). This can signifi-
cantly reduce the vibration load over the total
working period.
General Power
Tool Safety Warnings
WARNING!
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future
reference!
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of flam-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285802 PDFW 120 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285802 PDFW 120 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info