746421
15
Zoom out
Zoom in
Previous page
1/74
Next page
PTBS 520 A1
12 GBIE
DRYWALL SCREWDRIVER
PTBS 520 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The appliance is intended for rational, simple and
fast screwing in and unscrewing of drilling, drywall
and wood screws.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Belt clip
Locking button
ON/OFF switch
Speed preselection
Rotation direction switch
Tool holder
Screw (for adjusting the screw length)
Screw (for adjusting the screw depth)
Magazine attachment
Screw bit 150 mm (PH2)
Screw bit 25 mm (PH2)
Bit adapter
Depth stop sleeve
Adjusting ring
Lower belt guide
Screw belt
Upper belt guide
Screw stop
Package contents
1 drywall screwdriver PTBS 520 A1
1 magazine attachment
1 depth stop sleeve
2 screw belts (each with 50 screws 3.5 x 25 mm)
2 screw bits (25 mm/150 mm)
1 bit adapter
1 set of operating instructions
Technical data
Drywall screwdriver:
PTBS 520 A1
Rated voltage: 230 V
~
, 50 Hz
(AC)
Rated power
consumption: 520 W
Rated no-load speed: n
0
0–4500 rpm
Max. torque: 8 Nm
Tool holder: 1/4” hexagon socket
(6.35 mm)
Protection class: II /
(double insulation)
Magazine attachment:
Screw size:
Screw length: 25/30/35/40/41 mm
Max. shaft ø: 6 mm
Max.
screw head Ø: 9.5 mm
Screw-in depth: 3 screw depths
(continuously variable)
Depth stop sleeve:
Max. screw head Ø: 9.5 mm
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285766 PTBS 520 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285766 PTBS 520 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info