746436
21
Zoom out
Zoom in
Previous page
1/86
Next page
PAH 1700 A1
18
GB
IE
Fitting the chisel
WARNING!
Use only an appropriate hexagonal shaft
chisel with a diameter of 30 mm.
Before every use, check whether there is
enough grease in the appliance and on the
chisel (see section "Greasing").
Operation without grease will cause irrepa-
rable damage to the appliance.
Pull out the locking pin
and lock it into posi-
tion so that it does not block the tool holder .
The flat side of the locking pin must point
upwards to open the tool holder .
Fig. 2
Place the chisel
/ with the milled groove
pointing in the direction of the locking pin
(see fig. 2).
Turn the locking pin
180° until the small
groove on the locking pin points away from
the tool holder and it audibly clicks into
place. This locks the tool holder . The round-
ed side of the locking pin
points upwards.
Check that the chisel
/ is properly locked
in place by pulling it. The system has radial play
because of the design.
NOTE
If the locking pin
cannot be locked into
position, this means that the chisel / is
not in the correct position.
Move the machine into a vertical position
and then press the chisel / towards the
floor. You can now rotate the locking pin .
Removing the chisel
WARNING! RISK OF INJURY!
The chisel can become very hot during opera-
tion. Allow the chisel to cool down after use
and always wear protective gloves when you
are removing the chisel.
Pull out the locking pin
and lock it into position
so that it does not block the tool holder .
The flat side of the locking pin must point
upwards to open the tool holder .
Pull the chisel
/ out of the tool holder .
Use
WARNING! RISK OF INJURY!
The chisel can jam during use and this can
transfer powerful forces into the handle.
Always ensure that you are standing securely
and have a firm grip during operation.
Ensure that the appliance is switched off
before plugging it in.
WARNING!
Before every use, check whether there is
enough grease in the appliance (see section
"Greasing").
Operation without grease will cause irrepa-
rable damage to the appliance.
Before operating the appliance, check
whether there is enough oil in the appliance
(see section "Checking the oil level"). Opera-
tion without sufficient oil will cause irrepara-
ble damage to the appliance.
Do not apply excessive pressure when
working with the appliance. This reduces the
performance and puts added strain on the
motor.
IB_285765_PAH1700A1_LB8.indb 18 03.05.17 15:48
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285765 PAH 1700 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285765 PAH 1700 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info