746609

Parkside IAN 285212 PDKS 6.3 A1 Manual

19
Zoom out
Zoom in
Previous page
1/72
Next page
19 GB/IE
Introduction / General safety rules
Vibration parameters per EN 12096, ISO
28927-7
Hand-arm vibration level: 5.8 m / s
2
Uncertainty K: 0.6 m / s
2
Scope of delivery
1 Pneumatic saw
1 2 mm socket head wrench for installing / removing
the stop bracket
8
1 Socket head wrench 4 mm
6 Saw blades (3 saw blades for wood (HCS),
3 saw blades for metal (BIM))
2 Blade guards
1 Set of instructions for use
General safety rules
Multiple hazards! Read and understand
the safety notices before setting up, operating,
repairing, maintaining and replacing accessories
on circular, oscillating or reciprocating saws,
as well as before working near the machine.
Failure to observe this may result in severe
physical injuries.
Circular, oscillating and reciprocating saws
should only be set up, adjusted and used by
adequately qualified and trained persons.
Do not modify these circular, oscillating and re-
ciprocating saws. Modifications may reduce the
effectiveness of safety measures and increase
operator risks.
Never lose the safety notices – and pass on to
the user.
Never use a damaged circular, oscillating or
reciprocating saw.
The machines must be inspected regularly to ver-
ify the machine is labelled with clearly legible
rated values and markings. If necessary, the user
must contact the manufacturer for replacement
labels.
Risks due to projected parts
If the work-piece, one of the accessories or the
tool itself breaks, parts may be projected at
great speed.
Always wear impact-proof eye protec-
tion when using circular, oscillating,
or reciprocating saws. The level of
required protection required should be assessed
individually for each application.
It must be ensured that the work-piece is prop-
erly secured.
Be sure sparks and metal cuttings are directed
so they do not produce a hazard.
Be sure the saw blade is installed correctly
and firmly.
Hazards from entanglement
Failure to keep loose fitting clothing, jewellery,
necklaces / scarves (etc.), hair or gloves away
from the machine or accessories can pose a risk
of suffocation, scalping and / or cuts.
Operating hazards
Avoid contact with the saw blade to prevent cuts
to the hands or other body parts.
Guards must be safely installed and in good
working order.
Defective, bent or severely worn guards must
be replaced with guards recommended by the
manufacturer.
Be sure the retractable guard does not snap
from the fully opened position to the fully closed
position after being released.
Never lock or tie guards in an open position or
otherwise disable.
When using the machine the user‘s
hands may be exposed to hazards
such as cuts as well as abrasion and
heat. Wear suitable gloves to protect hands.
The operator and the maintenance personnel
must be physically capable of managing the
size, weight and power of the machine.
Introduction
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 285212 PDKS 6.3 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 285212 PDKS 6.3 A1 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info