746573
23
Zoom out
Zoom in
Previous page
1/88
Next page
PHSSA 12 A1
20 
GB
IE
Using the vehicle connector plug
Use the supplied vehicle connector plug to oper-
ate the appliance.
To do this, plug the vehicle connector plug
into the 12 V cigarette lighter of your vehicle.
As a rule, this can be found on the dashboard
of your vehicle. Many vehicles have a second
connection by the rear seats or in the boot.
The red LED indicates the operating display of
the vehicle connector plug
. Depending on
the vehicle type it is possible that the ignition
has to be switched on first.
Insert the battery adapter
of the vehicle
connector plug into the appliance.
When you have finished your work, pull the
vehicle connector plug
out of the 12 V
connection of your vehicle.
NOTE
Never connect your appliance without using
your appliance. The device also consumes
power in standby mode and therefore must
be disconnected from the on-board power
supply after use! Otherwise the battery will
discharge when the engine is not running.
Replacing the fuse
There is a fuse in the vehicle connector plug to
protect your vehicle's wiring system. If the device
no longer works, check the fuse and replace if
necessary.
Open the vehicle connector plug
by care-
fully unscrewing the screw insert anticlockwise
(using pliers if necessary) and removing it.
Remove the plug tip from the fuse and take out
the fuse.
Insert new 15 A fuse in your car charger
adapter.
Fit the plug tip to the slightly protruding end
of the fuse and screw the previously removed
screw insert back in.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The appliance is maintenance-free.
The appliance must always be kept clean, dry
and free from oil or grease.
Never allow liquids to get into the appliance.
Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 282944 PHSSA 12 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282944 PHSSA 12 A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info