746414

Parkside IAN 282492 PSSA 20 Li A1 Manual

26
Zoom out
Zoom in
Previous page
1/103
Next page
PSSA 20-Li A1
■ 22 
│
 GB
│
IE
Adjusting the footplate
RISK OF INJURY!
► Always remove the plug from the power
socket before working on the appliance.
♦ Adjust the footplate
according to the cutting
depth.
♦ To do so, undo the locking lever
and move
the footplate to the corresponding position.
♦ Lock this position by closing the locking lever
.
Adjusting the pendulum stroke
♦ You can use the pendulum stroke switch to
adjust the pendular movement of the saw blade
. You can achieve fine, clean-cut edges with-
out pendulum movement (setting "0"). Deacti-
vate pendulum movement when working on thin
workpieces. You can achieve an increasingly
fast work rate if the pendulum stroke is activated
(setting "I").
Use
Switching on and off
Switching on:
♦ First press the safety lock-out
and then the
ON/OFF switch . Afterwards, release the
safety lock-out .
Switching off:
♦ Release the ON/OFF switch
.
Adjusting the rotational speed
Press the ON/OFF switch lightly for a low speed.
Increasing the pressure increases the speed.
NOTE
►
The integrated motor brake ensures rapid
stoppage.
Guiding the sabre blade safely
To adapt to the workpiece and for safe placement,
the footplate can be swivelled. It must always be
in contact with the workpiece when the appliance
is running.
Practical advice on sawing
♦ Check the material to be worked to make sure
that all foreign objects have been removed,
e.g. nails, screws, etc.
♦ Ensure that the ventilation slits
are not
covered.
♦ Switch the appliance on before moving it
towards the material to be worked.
♦ Switch the appliance off immediately if the saw
blade
jams.
Open up the sawn gap using a suitable tool
and pull out the sabre saw.
■ Use the appropriate saw blade
and stroke
rate for the material to be worked.
■ Saw blades optimised for your sabre saw are
available from retail stores in different lengths
for various purposes.
■ Saw the material at a constant speed.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 282492 PSSA 20 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282492 PSSA 20 Li A1 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info