748066
22
Zoom out
Zoom in
Previous page
1/96
Next page
2 2
G B I E
e) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic eld which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Initial start-up
Attaching sanding sheet
Clean the sanding plate before at-
taching a sanding sheet.
Remove the mains plug rst.
Use only appropriate sanding sheet
sizes. Sanding sheets that protrude
laterally beyond the sanding plate
can cause injuries and can cause
the sanding sheets to block or tear.
The sanding plate (7) is tted with Velcro for
rapid attachment of the sanding sheet (9).
Sanding sheet with Velcro:
1. Ensure that the sanding sheet (9) lies ush.
2. Press the sanding sheet (9) evenly onto
the sanding plate (7).
Ensure that the holes are placed direct-
ly above the extraction openings of the
sanding plate (7).
Sanding sheet without Velcro:
1. Release the two clamping levers (6).
2. Slide the sanding sheet (9) under one
of the clamps (5).
3. Clamp the sanding sheet (9) by locking
the clamping lever (6).
The sanding sheet (9) must lie evenly
and tightly on the sanding plate (7).
4. Clamp the other end of the sanding
sheet (9) in the same way.
Attaching /removing /
emptying dust collection
box
Attaching the dust collection box:
1. Before connecting, ensure that the dust
collection box (4) is rmly closed.
2. You must keep the dust collection box
(4) slightly slanted when pushing it
on. Slide the dust collection box (4) all
the way onto the connection for dust
extraction (12). The nose of the dust
collection box (4) must be inserted into
the groove (13) of the connector (12).
3. Then tighten the dust collection box (4)
clockwise to lock.
Removing the dust collectionbox:
4. Unlock the dust collection box (4) coun-
terclockwise and pull the dust collec-
tion box (4) off.
Emptying the dust collectionbox:
5. Open the dust collection box (4) by
slightly squeezing it on the transparent
part and pulling the two parts apart.
6. Remove the lter insert (11) and empty it.
7. Re-insert the lter insert (11) and close
the dust collection box (4).
Empty the dust collection box regu-
larly to ensure optimal suction.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 282491 PSS 250 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282491 PSS 250 B2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info