746423
19
Zoom out
Zoom in
Previous page
1/70
Next page
PET 25 C2
16 
GB
IE
Setting the impact force
NOTE
Select the lowest impact force sufficient for
stapling. Take into account the length of the
staples or nails you are using as well as hard-
ness of the material you are working with.
Impact force control
Increasing the impact force:
Turn the impact force control
anticlockwise.
Reducing the impact force:
Turn the impact force control
clockwise.
Use
Switching on and off
Set the ON/OFF switch to the position "I" to
switch the appliance on.
Set the ON/OFF switch
to the position "0" to
switch the appliance off.
Stapling/nailing
Switch the appliance on by moving the ON/
OFF switch
to the position "I".
Press the face plate
of the appliance onto
the location on the material that you want to
staple/nail.
Press the trigger
.
NOTE
The integrated safety switch on the face plate
prevents accidental triggering.
Working with the rip fence
If you want to tack with nails or staples at a con-
stant distance to an edge, proceed as follows:
Pull out the rip fence
in the direction of the
arrow.
Move the rip fence
along the scale until it
is at the required distance from the edge of the
object that you want to work on.
Place the rip fence
onto the edge of the
object that you want to work on.
Proceed as described in the section Stapling/
nailing.
Troubleshooting
CAUTION!
Ensure that the appliance has been discon-
nected from the power in order to prevent
it from being accidentally switched on and
causing injuries.
Cause:
A staple or nail is blocking the appliance.
Solution:
Open the magazine slider
. This will remove
the tension. Use the hex key (fig. D) to remove
the screws from the face plate .
Remove the staple or nail.
Maintenance and cleaning
WARNING! RISK OF INJURY
Always remove the plug from the power
socket before working on the appliance.
The electric staple gun is maintenance free.
The appliance must always be kept clean, dry
and free from oil or grease.
Always clean the appliance directly after finish-
ing work.
Never permit liquids to enter inside the appli-
ance.
Use a cloth to clean the housing. Never use
petrol, solvents or cleansers which can damage
plastic.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 282487 PET 25 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 282487 PET 25 C2 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info