746147

Parkside IAN 280254 PMNF 1350 B2 Manual

12
Zoom out
Zoom in
Previous page
1/42
Next page
PMNF 1350 B2
GB
│
IE
│
NI 
│
 7 ■
Supplementary notes
Approved cutting disc designs:
segmented diamond-coated discs with slits
between the segments with a maximum size
of 10 mm and a negative cutting angle:
Disc diameter: 125 mm
Disc thickness: 2.1 mm
Wear hearing protection!
Wear safety goggles!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding!
Original accessories/auxiliary
equipment
■ Only use the accessories and additional equip-
ment that are specified in the operating instruc-
tions and are compatible with the appliance.
Before use
Setting the cut width of the diamond
cutting discs
♦ Loosen the locking screw .
♦ Push the depth stop
upwards.
♦ Press the spindle lock
and hold it down.
♦ Use the face spanner
to loosen the locking
flange .
♦ Remove the locking flange
.
♦ Set the desired cut width in accordance with
the number of blotters
. Ensure that the flange
is set in place as the top intermediate layer
(see fig. F).
NOTE
► There are several spacer washers available
for you. Ensure that the groove width is the total
of the spacer washers between the diamond
cutting discs and the thickness of the cutting
discs.
► Please make sure that the backing flange
is fixed well on the shaft. The backing flange
must rotate with shaft.
► Please make sure that diamond disc fixed
well on the flanges
+ .
♦ Tighten the locking flange
using the face span-
ner . Press the spindle lock while doing this.
NOTE
► When setting a cut width that is smaller than
the maximum cut width, you must use the
blotters
on the fixing flange side for fixing
the cutting discs since the fixing flange cannot
fix the discs alone on the spindle due to the
thread length (see fig. G).
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280254 PMNF 1350 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280254 PMNF 1350 B2 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 280254 PMNF 1350 B2

Parkside IAN 280254 PMNF 1350 B2 User Manual - French, Portuguese, Spanish - 91 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info