745929
5
Zoom out
Zoom in
Previous page
1/50
Next page
PABS 16 A2
2 
GB
IE
NI
CORDLESS DRILL PABS 16 A2
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for inserting, tightening
and loosening screws as well as drilling in wood,
metal, ceramics and plastics. The light on this appli-
ance is intended to illuminate the immediate work
area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Speed selector
Bit holder (magnetic)
Battery display LED
Rotation direction switch/lock
ON/OFF switch / Speed control
Battery pack
Release button for battery pack
LED work light
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
Package contents
1 cordless drill PABS 16 A2
1 high-speed battery charger PABS 16 A2-2
1 battery pack PABS 16 A2-1
1 bit PZ2 50 mm
1 carrying case
1 set of operating instructions
Technical data
Cordless drill: PABS 16 A2
Nominal voltage: 16 V
(DC)
Gearbox: 2 speed gearbox
Idle speed: 1st gear: n
0
0–400 rpm
2nd gear: n
0
0–1300 rpm
Max. torque: 25 Nm
Chuck clamping
range : max. Ø 10 mm
Drill diameter: Steel: 10 mm
Wood: 25 mm
Battery: PABS 16 A2-1
Type: LITHIUM ION
Lithium
Nominal voltage: 16 V (DC)
Capacity: 2.0 Ah
High-speed battery charger: PABS 16 A2-2
INPUT:
Nominal voltage: 230–240 V
~
50 Hz
(AC)
Power consumption: 45 W
OUTPUT:
Nominal voltage: 17 V
(DC)
Charging current: 2.4 A
Charging time: approx. 60 min
Fuse (internal): 2 A
T2A
Protection class: II /
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level: L
PA
= 68 dB(A)
Sound power level: L
WA
= 79 dB (A)
Uncertainty K: K = 3 dB
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 280213 PABS 16 A2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 280213 PABS 16 A2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info