745934

Parkside IAN 279873 PBS 900 B2 Manual

39
Zoom out
Zoom in
Previous page
1/48
Next page
■ 36 
│
 GB
PBS 900 B2
BELT SANDER PBS 900 B2
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The belt sander is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used). The appliance may only be used
for dry sanding. Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material. The appli-
ance is not intended for commercial use. Any other
uses of or modification to the appliance is deemed
to be improper and carries the risk of serious per-
sonal injury. The manufacturer accepts no responsi-
bility for damage(s) attributable to misuse.
Depicted components
Speed preselector wheel
Lock button
ON/OFF switch
Drive belt cover
Extraction nozzle
Adjustment screw for belt tracking
Additional handle
Ventilation slits
Clamping lever
Dust collector
Dust extraction adapter
Reducer
Screw clamps 2 x
Package contents
Check the package contents immediately
after unpacking the appliance:
1 belt sander PBS 900 B2
1 abrasive belt
1 dust collector
1 dust extraction adapter and reducer
(for external dust extraction)
2 screw clamps
1 set of operating instructions
Technical details
Rated voltage: 230 V ∼ 50 Hz
(alternating current)
Rated power
consumption: 900 W
Idling belt speed: 240–400 m/min
Rated idling speed:
n
0
450–750 rpm
Abrasive belt: 75 x 533 mm
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the tool
is typically:
Sound pressure level: L
pA
= 92.22 dB(A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 103.22 dB(A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Vibration emission value: a
h
= 6.115 m/s
2
Uncertainty K = 1.5 m/s
2
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 279873 PBS 900 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 279873 PBS 900 B2 in the language / languages: French, Italian as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 279873 PBS 900 B2

Parkside IAN 279873 PBS 900 B2 User Manual - English, German, Dutch, Danish - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info