745927
14
Zoom out
Zoom in
Previous page
1/84
Next page
PHKSA 20-Li A1
10 
GB
IE
NI
Operation
Fitting/changing the saw blade
Always remove the battery pack before changing
the saw blade !
1. Set the cutting depth (using the locking screw
) to the minimum position, 0 mm.
2. Swing the blade guard
back using the re-
lease lever and put the appliance down.
3. Press the spindle lock button (until it en-
gages) and use the hex key to release the
clamping screw . Now remove the clamping
screw and the clamping flange (see also
fig. A).
Fig. A: Changing the saw blade
4. Remove the saw blade
.
5. Fitting a saw blade is carried out in the
reverse order.
6. Press the spindle lock button
(until it engages)
and use the hex key to tighten the clamping
screw/washer .
WARNING!
The arrow on the saw blade
must cor-
respond to the arrow showing the direction of
rotation (running direction shown on the
blade guard ).
Ensure that the saw blade
is suitable for the
rotational speed of the tool.
Rip fence
Undo the wing screw and insert the rip fence
into the rip fence slot .
Set the desired cut width with the help of the
scale on the rip fence
and the cut out in the
base plate
(see also fig. B).
The right recess in the base plate is for a cutting
angle of 0°. The left-hand recess in the base
plate is for a cutting angle of 45°.
Fig. B: Cutting width 3 cm
Retighten the wing screw .
Connecting the sawdust extraction
device
Attach the adapter for dust extraction to the
chip ejector .
Optional, depending on the diameter of the
dust and sawdust extraction.
Connect an approved dust and chip extraction
device.
NOTE
When sawing wood or other materials that
create dusts that are hazardous to health,
always connect the appliance to a suitable,
certified suction appliance.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 279503 PHKSA 20 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 279503 PHKSA 20 Li A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info