Manual Parkside IAN 279501 PSBSA 20 Li A1 (page 12 of 65) (English, German, Dutch, Danish, French)

745931

Zoom out

Zoom in

1/65

PSBSA 20-Li A1

■ 8 │ GB

│

Use

Switching on and oﬀ

Switching on:

♦ To start the appliance, press the ON/OFF

switch

and keep it pressed in.

The LED work light

lights up when the ON/

OFF switch is depressed lightly or fully. This

allows for illumination of the work area in low

lighting.

Switching oﬀ:

♦ Release the ON/OFF switch

to switch oﬀ the

appliance.

Adjusting the rotational speed

Press the ON/OFF switch lightly for a low

speed. Increasing the pressure increases the speed.

NOTE

► The integrated motor brake ensures rapid

stoppage.

Changing the direction of rotation

♦ Change the direction of rotation by pressing the

rotational direction switch towards the left

or right.

Tips and tricks

Tip! This symbol indicates proper

behaviour.

♦ Before operating the appliance, check whether

the screw or drill bit is correctly positioned, i.e.

centred in the drill chuck.

♦ Screw bits are labelled according to their di-

mensions and their shape. If you are uncertain,

always check whether the bit ﬁts tightly in the

screw head without any free play.

Torque:

♦ Smaller screws/bits can be damaged if you set

the torque or rotational speed too high.

Hard screw joints (in metal):

♦ Particularly high torques occur, for example, in

metal screw joints made using drive sockets.

Select a low rotational speed.

Soft screw joints (e.g. in soft wood):

♦ Again, use a low rotational speed, for example

to avoid damaging the surface of the wood on

contact with the screw head. Use a countersink.

When drilling in wood, metal and other

materials, observe the following:

♦ Use a high speed for drill bits with small dia-

meter and a low speed for drill bits with large

diameter.

♦ Select a low speed for hard materials and a

high speed for soft materials.

♦ Mark the spot where you want to drill using a

centre punch or nail. Select a low rotational

speed when starting.

♦ Pull the rotating drill bit from the hole repeatedly

to remove dust and chips and clear the hole.

Drilling in metal:

♦ Use a metal drill (HSS). For optimum results,

you should cool the drill bit with oil.

Metal drill bits can also be used to drill into

plastics. Start with a 3 mm diameter drill bit

and then increase the size until the desired hole

diameter is achieved.

Drilling in brick:

♦ Use a carbide-tipped masonry drill.

(max. recommended hole diameter: Ø 15 mm)

Drilling in wood:

♦ Use a wood drill with a lathe centre; for deep

holes, use an auger bit; for large-diameter

holes, use a Forstner bit. Small screws can be

screwed directly into soft wood.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 279501 PSBSA 20 Li A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 279501 PSBSA 20 Li A1 Manual

Product: