745931
6
Zoom out
Zoom in
Previous page
1/65
Next page
PSBSA 20-Li A1
2 GB
IE
NI
2 SPEED CORDLESS IMPACT DRILL
PSBSA 20-Li A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
This appliance is intended for screwing in and
removing screws as well as drilling in wood, metal,
ceramic and plastic and impact drilling in bricks
and masonry. It is not suitable for impact drilling
in natural stone such as granite. The light on this
appliance is intended to illuminate the immediate
work area of the appliance.
Use this product only as described and for the
areas of applications specified. The appliance is
not intended for commercial use. Any other usage
or modification of the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse.
Features
Speed selector
Rotation direction switch/lock
ON/OFF switch / Speed control
Bit holder (magnetic)
Battery charge level button
Battery display LED
Battery pack
Release button for the battery pack
LED work light
Additional handle
Chuck
Torque preselection ring
High-speed charger
Red charge control LED
Green charge control LED
Package contents
1 2 speed cordless impact drill PSBSA 20-Li A1
1 high-speed battery charger PLG 20 A1
1 battery pack
1 additional handle
1 set of operating instructions
Technical data
2 speed cordless impact drill: PSBSA 20-Li A1
Rated voltage: 20 V
(DC)
Gearbox: 2 speed gearbox
Rated idle speed: 1st gear: n
0
0–440 rpm
2nd gear: n
0
0–1650 rpm
Hammer frequency: 0–26400 bpm
Max. torque: 40 Nm
Torque levels: 1–20 + 1 drill level /
+ 1 hammer level
Chuck capacity:
: Ø max. 13 mm
Max. drill diameter: 30 mm for wood
15 mm for tiles
13 mm for steel
Use only the following battery to operate
the cordless tool: PAP 20 A1
Type: LITHIUM ION
Rated voltage: 20 V
(DC)
Capacity: 2 Ah
Cells: 5
Use only the following high-speed battery
charger to charge the cordless tool:
PLG 20 A1
INPUT:
Rated voltage: 230–240 V
~
, 50 Hz
(AC)
Rated power
consumption: 65 W
Fuse (internal): 3.15 A
T3.15A
OUTPUT:
Rated voltage: 21.5 V (DC)
Rated current: 2.4 A
Charging time: approx. 60 min
Protection class: II / (double insulation)
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 279501 PSBSA 20 Li A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 279501 PSBSA 20 Li A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info