Manual Parkside IAN 275679 PDEXS 150 B2 (page 7 of 66) (English, German, Dutch, Danish, French)

745526

Zoom out

Zoom in

1/66

PDEXS 150 B2

Hazards caused by entanglement

■ Suﬀocation, scalping or and/or cut wounds can

occur if loose clothing, jewellery, necklaces, hair

or gloves are not kept away from the machine

and its accessories.

Hazards during operation

■ When using the machine, the operator's hands

can be subject to hazards such as cuts, grazing

and heat. Wear suitable gloves to protect your

hands.

■ The operator and maintenance personnel must

be physically capable of handling the size,

mass and power of the machine.

■ Hold the machine correctly: be ready to coun-

teract any normal or sudden movements - have

both hands ready.

■ Ensure that your body is balanced and that you

have a secure standing position.

■ Release the start/stop control in case of a dis-

ruption to the electricity supply.

■ Use only lubricants recommended by the manu-

facturer.

■ Avoid direct contact with the movable grinding

disc to avoid squashing or cutting your hands or

other parts of the body. Always wear suitable

gloves to protect your hands.

■ Check the sanding disc before every use. Do

not use if this is cracked, broken or has been

dropped.

■ Avoid direct contact with the movable sanding

disc to avoid squashing or cutting your hands or

other parts of the body. Always wear suitable

gloves to protect your hands.

■ Never use the machine without an abrasive

attachment.

■ There is a risk of electrostatic discharge if the

machine is used on plastic and other non-

conductive materials.

■ Dust and vapours created by the sanding and

sanding can cause a potentially explosive at-

mosphere. Always use a dust extraction or sup-

pression system suitable for the material being

worked.

Risks due to repetitive movements

■ When using a sanding machine for sanding

sheets or a polisher to perform work-related

activities, operators may experience uncomfort-

able sensations in their hands and arms, as well

as in the neck and shoulders or other parts of

the body.

■ When using a sanding machine for sanding

sheets or a polisher, the operator should adopt

a comfortable posture whilst ensuring a secure

hold and avoiding awkward postures or posi-

tions in which it is diﬃcult to maintain balance.

The operator should change positions during

the course of long-lasting tasks. This can be

helpful in the prevention of discomfort and

fatigue.

■ If the operator notices symptoms such as persis-

tent or recurring illness, discomfort, throbbing,

pain, tingling, burning or stiﬀness, these indica-

tions should not be ignored.

In this case, the operator should consult a suitably

qualiﬁed physician.

Hazards caused by accessories

■ Disconnect the sanding machine for sanding

sheets or the polisher from the power supply

before ﬁtting or replacing the machine tools or

accessories.

■ Avoid direct contact with the machine tool during

and after use, since this can have heated up or

have become sharp.

■ Only machine tools which were designed by

the manufacturer for sanding machines with

sanding sheets and polishers may be used

for sanding machines for sanding sheets and

polishers.

■ Cutting discs and machines for cutting may not

be used.

■ Check whether the maximum operational speed

of the machine tool (buﬀs, sanding sheets, ﬁbre

discs etc.) is higher than the rated speed of the

machine;

■ Self-adhesive sanding discs must be applied

concentrically on the mounting plate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275679 PDEXS 150 B2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275679 PDEXS 150 B2 Manual

Product: