Manual Parkside IAN 275675 PDT 40 D3 (page 8 of 37) (English, German, Dutch, French)

745547

Zoom out

Zoom in

1/37

8 GB/IE

Safety of the fastener driving tool / Preparing the product for use / OperationSafety of the fastener driving tool

At the workplace, only carry the fas-

tener driving tool by its grip and never

with the trigger actuated.

Pay attention to workplace conditions.

Fasteners may strike completely through thin

workpieces or slide oﬀ corners or edges to

cause a danger to persons.

Use suitable personal protection equip-

ment, e.g. hearing and eye protection.

Wearing personal protective devices such as

dust mask, non-slip safety shoes, safety helmet

or hearing protectors, depending on the type

of fastener driving tool and its application, re-

duces the risk of injuries.

Additional safety information

for compressed air tackers

RISK OF INJURY! Never

exceed the maximum permissible operating

pressure of 8 bar. Use a pressure reducer to

adjust the operating pressure.

RISK OF INJURY! Never

use oxygen or other ﬂammable gases as ener-

gy source.

Keep your working area clean and

well lit. Untidy or poorly lit working areas

can lead to accidents.

Keep children and other individuals

away from the fastener driving tool

during use. Distractions can cause you to

lose control of the device.

Remain alert at all times, watch what

you are doing and always proceed with

caution when working with a fastener

driving tool. Do not use any fastener

driving tool if you are tired or under the

influence of drugs, alcohol or medica

tion.

One moment of carelessness when using the fas-

tener driving tool may result in serious injuries.

Avoid placing your body in an unnat-

ural position. Keep proper footing

and balance at all times. By doing this you

will be in a better position to control the fas-

tener driving tool in unforeseen circumstances.

Before any repair and maintenance work or

transport, remove the device from the com-

pressed air source.

RISK OF INJURY! Do not use the device on

scaﬀolds or ladders.

Never use hydrogen, oxygen, carbon

dioxide or other bottled gasses to

power this tool as doing so may re-

sult in an explosion and thus may cause severe

injuries.

RISK OF INJURY! Do not use the device if

the trigger lock

is damaged or has been

removed. Otherwise injuries may result.

When loosening the hose coupling, hold the

hose ﬁrmly in your hand to prevent injuries

caused by a rebounding hose.

Be absolutely certain to use a ¼ threaded

nipple and a quick-release coupling for the

compressed air connection.

Never place your hands near the mouth when

the device is ready to operate. Otherwise inju-

ries may result.

Pay attention to damage. Check the de-

vice for damage before bringing it into use. If

the device exhibits defects, it must not be oper-

ated under any circumstances.

Do not use any pointed objects. Never

insert pointed and / or metal objects into the

inside of the device.

Only connect the air-powered staple gun to

lines which are guaranteed not to exceed the

maximum operating pressure by more than

10 %, e.g. with a pressure control valve in the

compressed air line (pressure regulator) with

downstream or built-in pressure limiting valve.

When using the air-powered staple gun be sure

not to exceed the max. pressure.

Only operate the air-powered staple gun at the

pressure required for the respective operation

to prevent needlessly high noise levels, inc

reased

wear and malfunctions this causes.

FIRE AND EXPLOSION

HAZARD! Never pressurise the air-powered

staple gun with oxygen or ﬂammable gasses.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275675 PDT 40 D3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275675 PDT 40 D3 Manual

Product: