745471
6
Zoom out
Zoom in
Previous page
1/44
Next page
GB
IE
 3
PBSG 95 B1
Vibration emission value:
Measured values determined as per EN ISO 5349-1
and EN ISO 5349-2: a
h
≤ 2.5 m/s
2
NOTE
The vibration emission value given in these
instructions has been measured in accordance
with a standardised test procedure and can
be used for comparison of the power tool
with another tool. The specified vibration
emission value can also be used to make an
initial estimate of the vibration load.
WARNING!
The vibration emission value may differ from
the stated value during the actual use of the
power tool, depending on the manner in
which the power tool is being used. For an
accurate estimate of the vibration load during
a specific working period, periods during
which the appliance is switched off (or is
running, but not actually being used) must
also be taken into consideration. This can
significantly reduce the vibration load over
the total working period.
General Power Tool
Safety Warnings
Caution! When using power tools,
note the following basic safety pre-
cautions to protect yourself against
electrical shock, injury and fire hazards. Read
all these instructions before using this power
tool and store the safety instructions in a safe
place.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
Working safely
1. Keep your workspace tidy.
Untidiness in the work area can cause accidents.
2. Take account of environmental influences.
Do not expose the power tool to rain.
Do not use the power tool in wet or moist
environments.
Ensure that your workspace is adequately lit.
Do not use power tools in environments where
there is a risk of explosion or fire.
3. Protect yourself from electric shock.
Avoid body contact with grounded surfaces
(e.g. pipes, radiators, electric cookers, refrig-
erators and freezers).
4. Keep other people at a distance.
Do not allow other people, especially children,
to touch the power tool or the cord. Keep them
out of your work area.
5. Store unused power tools safely.
Unused electric tools should be placed in a dry,
high-up or closed-off place out of the reach of
children.
6. Do not overload your power tool.
You will work better and more safely in the
specified performance range.
7. Use the right power tool for the job.
Do not use low-performance tools for heavy-duty
work.
Do not use the power tool for purposes for
which it is not intended. For example, do not
use a circular saw to cut tree branches or logs.
8. Wear appropriate clothing.
Do not wear loose clothing or jewellery, which
could get caught in moving parts.
Non-slip footwear is recommended when working
outdoors.
If you have long hair, wear a hairnet.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275646 PBSG 95 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275646 PBSG 95 B1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info