745459
17
Zoom out
Zoom in
Previous page
1/120
Next page
IE
17
GB
An overview of appropriate blades
-
sories”.
Installing the blade:
1. Push the lever (19) for sawblade
unlocking upwards as far as
the stop. Push the sawblade
shaft (20/21) into the sawblade
mounting slot.
 
it will return to the initial position.
3. Check that the sawblade is se-
cure by pulling on it.
Removing the sawblade:
4. Press the lever (19) for sawblade
unlocking upwards as far as the
stop and then pull the sawblade
out of the sawblade mounting.
For certain work, the sawblade
can also be inserted after turning
through 180°.
Operating the sabre saw
1. Before switching the appliance on,
ensure it is not in contact with the work-
piece.
 
By using the on/off switch ( 11) you
can progressively control the stroke
rate.
Gentle pressure: low stroke rate.
Greater pressure: higher stroke rate.

3. Place the footplate ( 18) on the work-
piece.
4. Cut with a uniform forward motion.
 -
move the blade from the saw cut and
then switch the appliance off.
Motor unit with multifunction
tool PKGA4
Changing the tool
Secure the appliance against
switching on (see “Switch-
ing on/off”). If the appliance
is switched on accidentally,
there is a danger of injury.
1. Push the lever (27) for tool un-
locking upwards as far as the
stop.
2. Pull the unlocked tool holder (29)
off forwards.
3. Place the required tool
(30/32/33) on the arbor (28).
12 different positions are pos-
sible.
4. Press the tool holder (29) back
into the central mounting.
5. Push the lever (27) for tool un-


Attaching/removing sanding
sheet
-
cro for rapid attachment of the sanding sheet.
Attaching sanding sheet
1. Press the sanding sheet (31)
evenly onto the delta sanding
plate (30). Ensure that the holes
in the sanding sheet are placed
above the openings in the sand-
ing plate.
Removing sanding sheet
2. Simply pull the sanding sheet
(31) off the delta sanding plate
(30).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275627 PKGA 14.4 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275627 PKGA 14.4 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info