745459
11
Zoom out
Zoom in
Previous page
1/120
Next page
IE
11
GB

ensures that the safety of the de-
vice is maintained.
Before each use, check the
charger, cable and plug
and have them repaired
-
als and only with original
parts. Do not use a defec-
tive charger and do not
open it up yourself. 
ensures that the safety of the de-
vice is maintained.
Connect the charger only
to a socket with an earth.
Ensure that the mains volt-
-
tions on the charger rating
plate. Risk of electric shock.
Disconnect the charger
from the mains before
closing or opening connec-
tion to the battery / pow-
er tool / device. 
that the battery and charger are
not damaged.
Keep the charger clean
and away from wet and
rain. Do not use the charg-
er outdoors. Dirt and the en-
try of water increase the risk of
electric shock.
Operate the charger only
with the appropriate origi-
nal batteries. Charging other
batteries may result in injuries

Avoid mechanical damage
to the charger. 
in internal short circuits.
Do not operate the charg-
er on a combustible sur-
face (e.g. paper, textiles).
-
ing charging.
If the power cable for this
equipment is damaged, it
must be replaced by the
manufacturer, a customer
service agent of the same

person in order to prevent
hazards.
Do not charge non-re-
chargeable batteries in the
charger. 
the appliance.
Additional safety instructions
Warning! Sawing or sanding
can result in the formation of
hazardous dusts (e.g. arising
from materials with paints
containing lead, materials
containing asbestos, metals
or some wood types) which
can present a hazard to the
operator or persons in the
vicinity. Make sure that the
workplace is well ventilated.
Always wear safety goggles,
safety gloves and respiratory
protection. Attach a dust ex-
traction system.
1) SPECIAL SAFETY INFORMATION
FOR THE CORDLESS COMBINA-
TION TOOL
Hold the electric tool by the in-
sulated gripping surfaces when
performing work in which the
cutting tool may come into con-
tact with hidden wiring. Contact
with a live wire can also cause a
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275627 PKGA 14.4 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275627 PKGA 14.4 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info