745459
6
Zoom out
Zoom in
Previous page
1/120
Next page
GB IE
6
Technical Data
4in1 Cordless combination tool ... PKGA 14.4 A1
Motor voltage ........................... 14,4 V
Idling speed (n0) ....................21000 min-1
Sound pressure level (LpA) ........ 86,7 dB(A),
K= 3 dB
Sound power level (LWA) ........... 97,7 dB(A)
K= 3 dB
Motor unit with
drill attachment .............. PKGA1
Idling speed (n0) ........ 0-400/0-1350 min-1
 .................................max. 25 Nm
Spread drill chuck ................... 1.0-10 mm
Drill diameter
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Weight (without charger) ................1,4 kg
Vibration (ah)
drilling in metal ....1,615 m/s2, K= 1,5 m/s2
drilling in wood ...1,475 m/s2, K= 1,5 m/s2
Motor unit with
multisander attachment ..PKGA2
Oscillation rate (n0) ..............0-9000 min-1
Sanding sheet size .......138 x 97 mm
Weight (without charger) ................1,3 kg
Vibration (ah) ......4,383 m/s2, K= 1,5 m/s2
Motor unit with
sabre saw attachment ....PKGA3
Stroke rate (n0) ..................... 0-3200 min-1
Stroke length ...................... 22 mm
Weight (without charger) ................1,7 kg
Vibration (ah)
Sawing boards ................. 11,926 m/s2
Sawing wood beams ........ 12,392 m/s2
K= 1,5 m/s2
Motor unit with
multifunction tool ...........PKGA4
Oscillation rate (n0) ............0-20000 min-1
Oscillation angle ..............................3,0°
Weight (without charger) ................1,3 kg
Battery (Li-Ion) .............................. PAP14.4
Nominal voltage ....................... 14,4 V
Capacity ...................................... 1,5 Ah
Charging time ...................... approx. 1 h
Recharger .......................... JLH-H150-14.4
Nominal consumption .....................40 W
Voltage input .........100-240 V~, 50-60 Hz
Voltage output ............ 14,4 V 1500 mA
Protection class ................................. II
Protection category .......................... IPX0
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration of
conformity.

undertaken in the course of further develop-
ment without notice. All dimensions, referenc-
es and information in this instruction manual
are therefore not guaranteed. Legal claims
made on the basis of the instruction manual
can therefore not be considered as valid.

measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.

also be used for a preliminary exposure as-
sessment.
Warning: 
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275627 PKGA 14.4 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275627 PKGA 14.4 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info