745920
11
Zoom out
Zoom in
Previous page
1/76
Next page
GB
11
IE NI
Installing the eccentric
grinder disc:
5. Place the desired eccentric
grinder disc (17) on the mount-
ing plate (23).
6. Fasten the sanding disc with the
4 Phillips screws (22).
7. Make sure that the sanding disc
is rmly in place.
Installing the orbital sand-
er disc and hand sander
disc:
5. Insert the 4 rubber pins (27) with
the latching nose (27a) into the
4 recesses in the sanding disc
(18/ 12).
6. Place the desired sanding disc
(18/ 12) on the mounting
plate (23).
The rubber pins (27) t into the
recesses of the device. Only one
position is possible.
7. Fasten the sanding disc with the
4 Phillips screws (22).
8. Make sure that the sanding disc
is rmly in place.
Attaching/removing sanding
sheet
Clean the sanding disc before you
attach a sanding sheet.
When using sanding sheets without
ventilation holes, dust extraction is
not possible.
Use only appropriate sanding sheet
sizes. Sanding sheets, which ex-
tend beyond the sanding disc, can
cause injuries and can cause the
sanding sheets to block or tear.
Sanding sheet with Velcro
The sanding discs are tted with Velcro back-
ing for quick mounting of sanding sheets.
Attaching sanding sheet:
1. Press the desired sanding sheet
(19/ 20/ 21) evenly onto
the sanding disc (12/ 17/
18). Ensure that the ventilation
holes in the sanding sheet are
placed directly above the extrac-
tion openings in the sanding disc.
Removing sanding sheet:
2. Simply pull the sanding sheet
(19/ 20/ 21) off the sand-
ing disc (12/ 17/ 18).
Sanding sheet without Velcro
The orbital sander disc (12) is equipped
with terminal strips (13) for clamping sand-
ing sheets without Velcro (sanding sheets
not included).
Clamping sanding sheet:
1. Open the two clamping levers
(14) on the orbital sander disc
(12).
2. Slide one end of the sanding
sheet under the terminal strip
(13).
3. Clamp the sanding sheet by lock-
ing the clamping lever (14).
4. Pull the sanding sheet tightly
over the orbital sander disc (12).
Clamp the other end of the sand-
ing sheet.
Removing sanding sheet:
5. Open the two clamping levers
(14) and pull out the sanding
sheet.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275401 PMFS 200 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275401 PMFS 200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info