745920
6
Zoom out
Zoom in
Previous page
1/76
Next page
GB
6
IE NI
Technical Data
3-in-1 multi-purpose sander
..... PMFS 200 B2
Rated input voltage (U) ......230 V~, 50 Hz
Power input (P) ............................. 200 W
Idling speed (n0) ...........7000-12000 min-1
Oscillation rate (n) ......14000-24000 min-1
Weight (without sander disc and
dust collection box) .....................1.38 kg
Protection class ................................. II
Protection category ........................... IP20
Sound pressure level
(LpA) ......................79 dB(A); KpA = 3 dB
Sound power level
(LWA) ....................90 dB(A); KWA = 3 dB
Vibration
(ah) ................ 13.4 m/s2; Kh = 1.5 m/s2
Technical and optical changes may be
undertaken in the course of further develop-
ment without notice. All dimensions, refer-
ences and information in this instruction
manual are therefore not guaranteed. Legal
claims made on the basis of the instruction
manual can therefore not be considered as
valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
Notes on Safety
This section details the basic safety instruc-
tions for working with the appliance.
Symbols
Symbols in the manual:
Warning symbols with infor-
mation on damage and injury
prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275401 PMFS 200 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275401 PMFS 200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info