745537
9
Zoom out
Zoom in
Previous page
1/64
Next page
9
GB IE NI
Assembly
Pull out the mains plug.
Danger of electric shock.
The appliance is supplied with the
folded lter (
23) tted.
1. Place the 4 steering castors (11) onto
the mounts on the stainless steel con-
tainer (9). Attach each steering castor
with a crosshead bolt (11a).
2. Push the bow handle (1) onto the two
bow handle tie bars (2) and screw it in
place with 2 crosshead bolts (1a).
3. Place the motor head (3) on the stain-
less steel container (9).
4. Close the stainless steel container by
folding up the bow handle and xing
it with the locking levers (14). everal
positions are possible for the bow han-
dle.
The locking lever must be tightened so
that a tensioning with medium force
can be carried out. You can set the ten-
sion by turning the locking lever:
- Tighten: turn clockwise.
- Loosen: turn anti-clockwise.
5. Place the carrying handle (4) on the
motor head (3) and screw it on tight
with 2 crosshead screws (4a).
6. Fit the accessories:
- Connect the suction hose (19).
- Fit the handle (20)
- Fit the telescopic suction pipe (17).
(Press the knob on the telescopic suc-
tion pipe in the
direction and
separate to the desired length).
- Fit the desired nozzle (25/26).
Never vacuum without a lter!
To store the suction set during
breaks, push together the telescopic
suction hose (17) and plug the suc-
tion pipe holder (18) into the socket
on the motor housing (see picture
below).
Operation
Fully unwind the suction hose (
19) before commencing work.
Switching on/off
Connect the mains plug.
Do not vacuum without a lter!
How to insert the lter is described
in the chapters dry vacuuming“
and “wet vacuuming“.
Switching On:
On/Off Switch (
6) In position I“.
Switching Off:
On/Off Switch (
6) In position 0”.
Dry vacuuming
The appliance is supplied with the
folded lter (23) tted.
Vacuuming with a uted lter:
1. For dry vacuuming, t the uted lter
(23) onto the lter basket (27) on the
motor head (3). The sealing lip that
curves upward must point away from
the motor head.
2. Fit the lter cover (22) and lock it with
a light turn:
Lock the lter cover
Unlock the lter cover
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275394 PNTS 1400 E2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275394 PNTS 1400 E2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 2,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275394 PNTS 1400 E2

Parkside IAN 275394 PNTS 1400 E2 User Manual - French, Italian - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info