745935
18
Zoom out
Zoom in
Previous page
1/80
Next page
18
GB IE NI
Troubleshooting
Problem Possible cause Error correction
Appliance does not
start
No mains voltage
Main circuit breaker is tripped
Check the socket, power cable,
line, power plug, repairs to be
carried out by qualied electri-
cian if necessary, check main
circuit breaker.
On/off switch (
6) is broken
Repair by Customer Care
Motor faulty
Engine is slower
and stops
Device is overloaded through
workpiece
Reduce the pressure
Increase rotation speed
Workpiece unsuitable
The milling is not
straight
The guide bars (
29) of the
parallel stop (
24) are not
mounted rmly.
If necessary, retighten the screws
of the guide bars.
The milled work-
piece has burn
marks
Rotation speed too low Increase rotation speed
Unsuitable or blunt cutter Change the cutter
Cutting depth is set too large
Use the step stop to mill in multi-
ple steps
The fringes of the
milled part tear off,
there are grooves
and uneven parts
in the milling
Cutter is worn out and dull Change the cutter
Cutter blades are damaged Change the cutter
Dust is not being
sucked off
Vacuum is not switched on Turn on vacuum before milling
Suction hose or suction adapt-
er (
20) is clogged
Remove clogging
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275390 POF 1200 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275390 POF 1200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 User Manual - French, Italian - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info