Manual Parkside IAN 275390 POF 1200 B2 (page 10 of 80) (English, German, Dutch, Danish)

745935

Zoom out

Zoom in

1/80

GB IE NI

poorly maintained power tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting

tools with sharp cutting edges are less

Iikely to bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking

into account the working condi-

tions and the work to be per-

formed. Use of the power tool for op-

erations different from those intended

could result in a hazardous situation.

• Carefully inspect the area to be cut

and remove all wires or other foreign

bodies.

Service

• Have your power tool serviced

by a qualied repair person us-

ing only identical replacement

parts. This will ensure that the safety

of the power tool is maintained.

Safety notices for milling

cutters

Warning! Milling can result in

the formation of dusts hazardous to

health (e.g. arising from materials

with paints containing lead, materi-

als containing asbestos or some

wood types), which can pose a risk

to the operator or persons nearby.

Make sure that the workplace is

well ventilated. Always wear safety

goggles, safety gloves and respira-

tory protection. Attach a dust ex-

traction system.

• Hold the power tool on the in-

sulated handle surfaces, as the

cutter might hit its own power

cable. Contact with a live wire can

also cause a charge in metal parts of

the appliance and result in an electric

shock.

• Fasten and secure the work-

piece by means of clamps or

with another method on a sta-

ble underground. If you hold the

workpiece only with your hand or

against your own body, it will stay

instable and this can lead to a loss of

control.

• The permissible rotation speed

of the attachment tools must be

at least as high as the highest

rotation speed indicated on the

power tool. Accessories that run

faster than the permissible speed can

be destroyed.

• Cutters and other accessories

must be exactly matching the

tool holder (collet chuck) of your

power tool. Attachment tools that

are not exactly matching the tool hold-

er of the power tool rotate unevenly, vi-

brate very strongly and can ultimately

lead to a loss of control.

• Ensure that the cutter is assem-

bled correctly. A cutter that is not

assembled correctly can break during

the milling or be ejected and present a

risk of injury.

• Move the power tool against

the workpiece only when it is

turned on. Otherwise, there is a risk

of kickback if the attachment tools jam

in the workpiece.

• Do not put your hands in the

cutting area and neither on the

cutter. Hold the additional han-

dle or the motor housing with

your other hand. When holding

the milling cutter with both hands, they

cannot be injured by the cutter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275390 POF 1200 B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 4,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275390 POF 1200 B2

Parkside IAN 275390 POF 1200 B2 User Manual - French, Italian - 84 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 275390 POF 1200 B2 Manual

Product: