745470
6
Zoom out
Zoom in
Previous page
1/45
Next page
2 
GB
IE
NI
PBF 400 A1
BANDFILE PBF 400 A1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The bandfile is designed for filing work, especially
on difficult-to-access locations, on wood, plastic,
metal and fillers in addition to painted surfaces.
Please note that you need to use appropriate
grinding belts with different grains for working dif-
ferent materials, and that you may need to adapt
the speed to suit the material. The appliance is not
intended for commercial use. Any other uses of
or modification to the appliance is deemed to be
improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility
for damage(s) attributable to misuse.
Features
Speed control
Locking button
Handle
ON/OFF switch
Dust bag
Side handle
Assembly and adjusting screw
Grinding frame, large
Clamping lever
Dust extraction adapter
Abrasive belt
Grinding frame, small
Grinding frame, angled
Spring
Front roller
Adapter fitting
Package contents
1 bandfile PBF 400 A1
5 abrasive belts for metal, wood, 8 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
5 abrasive belts for metal, wood, 13 x 455 mm
(2 x 60 grain, 2 x 80 grain, 1 x 120 grain)
1 dust bag
1 dust extraction adapter (for external dust
extraction)
1 straight frame, 8 mm
1 straight frame, 13 mm
1 angled frame, 13 mm
1 carrying case
1 set of operating instructions
Technical details
Rated voltage: 230 V ∼ 50 Hz
(alternating current)
Rated
power consumption: 400 W
Idling belt speed: 1070–1650 m/min
Rated idling speed:
n
0
2350–3600
rpm
Abrasive belt: 8 x 455 mm and
13 x 455 mm
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accord-
ance with EN ISO 4871. The A-rated noise level
of the power tool is typically:
Sound pressure level: L
pA
= 82 dB(A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 93 dB(A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275350 PBF 400 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275350 PBF 400 A1 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info