745538
10
Zoom out
Zoom in
Previous page
1/52
Next page
1 0
G B I E
edges.
Make sure that the mains voltage
corresponds with the information
on the rating plate.
Only plug the appliance into a
socket which is safeguarded by
at least 16A.
The device must only be con-
nected to a mains socket via a
residual-current circuit breaker
(RCD) with a rated leakage cur-
rent of not more than 30mA.
CAUTION! The following
states how damage to the ap-
pliance and possible injury to
people can be avoided:
Ensure that the machine is cor-
rectly assembled and the lters
are in the correct position.
Do not use without the lter. This
could damage the machine.
Only use replacement parts and
accessories delivered and recom-
mended by our Service Centre.
The use of parts by other manu-
facturers immediately renders the
guarantee void.
Only have repairs carried out at
our authorised customer service
points.
Observe the instructions for
cleaning and maintenance of the
machine.
Store the appliance in a dry place
and out of reach of children.
Assembly
Pull out the mains plug.
Danger of electric shock.
1. Attach the feet (6) to the housing:
- The feet with wheels (6a) num-
bered
+
must be tted
into the appropriate adaptors
on the rear side of the waste
collector (see
small picture).
- The feet with guide rollers
(6b) must be tted to the hold-
ers on the front side of the
container (5).
2. Secure the feet with the Philips
head screws supplied.
3. Place the motor housing (3) on
top of the collector (5) and close
it with the clip.
4. Lightly squeeze together the
ends of the retaining bracket
(25) and click it into the motor
housing (3).
5. Installing the accessories:
- Attach the vacuum hose (18).
- Fit the handle with air control
(15).
- Install the telescopic suction
tube (16). (Press the button on
the telescopic suction pipe to-
wards
and pull out to the
desired length).
- Install the nozzle desired (
21/22/23/24).
Never vacuum without a lter!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 275083 PNTS 1500 B3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 275083 PNTS 1500 B3 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 275083 PNTS 1500 B3

Parkside IAN 275083 PNTS 1500 B3 User Manual - French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info