745532

Parkside IAN 273482 PTSS 1200 A1 Manual

47
Zoom out
Zoom in
Previous page
1/52
Next page
44
PTSS 1200 A1
GB
Operation
Switching on and off
Switching on:
♦ Push the safety lock-out
upwards and hold it
in position.
♦ Press the ON/OFF switch
. Once the saw is
running, you can release the safety lock-out .
Switching off:
♦ Release the ON/OFF switch .
Setting the cutting depth (dive depth)
♦ Undo the screw for the cutting depth adjust-
ment and push the stop to the desired
cutting depth on the cutting depth scale :
– without guide rail, see mark A.
– with guide rail, see mark B.
♦ Retighten the screw for the cutting depth adjust-
ment
.
NOTE
► Adjust the cutting depth to the thickness of the
workpiece. Less than a full tooth height
should be visible below the workpiece.
Setting the cutting angle
(mitre angle)
♦ Loosen the two adjustment wheels for the
cutting angle .
♦ Tilt the motor to the desired cutting angle.
♦ Retighten the adjustment wheels
.
NOTE
► If you have set the cutting angle adjustment to
0° or 45°, you can use the fine adjustment
screws
and
8a
to make any fine adjust-
ment that you require.
Note the cut line
♦ Cut line markings
9a
of 0°/45° are imprinted
into the base plate
.
♦ Align the appliance to the corresponding 0°
or 45° cut line markings
9a
in accordance
with the set cutting angle.
♦ The inclined surfaces are reference points for
this.
Connecting the guide rails
The guide rails will help you to make straight
cuts.
♦ To connect the 2 guide rails, push the connec-
tor
into the groove of the guide rails. Tighten
the grub screws using the Hex key supplied.
NOTE
► The guide rails
have a splinter guard
(black rubber lip). The splinter guard must be
adjusted before making the first cut. Place the
guide rail onto a workpiece. Set a cutting
depth of approx. 10 mm. Switch the circular
saw on and push it gently and evenly in the
cutting direction.
9a
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273482 PTSS 1200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273482 PTSS 1200 A1 in the language / languages: French, Italian as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 273482 PTSS 1200 A1

Parkside IAN 273482 PTSS 1200 A1 User Manual - English, German, Dutch - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info