745467

Parkside IAN 273479 PSSA 18 A1 Manual

15
Zoom out
Zoom in
Previous page
1/64
Next page
G B
1 5
I E
Checking the charge status
of the rechargeable battery
The state of charge display (11a) indicates
the state of charge of the battery (11).
Press the button (11b) on the
battery (11). The state of charge
of the battery is displayed by il-
luminating the 3-colour LED lights
of the state of charge display
(11a).
All LEDs are on: Battery is fully
charged.
Red and yellow LEDs are on:
Battery has a residual charge
(< 90 %).
Red LED lights up: Battery is
empty, please charge.
Practical tips
Wear gloves when handling the
saw blade. In this way, you avoid
injury from cuts.
Caution: Risk of injury and
damage to property!
- Do not use any blunt or bent
blades or blades which are dam-
aged in any other way.
- Before sawing the work piece,
check for hidden foreign objects
such as nails, screws. These must
be removed.
- Always insert a suitable saw
blade.
- Secure the work piece with the
aid of clamping devices on the
workbench.
- Apply only as much pressure as
is required for sawing. If there is
excessive pressure, the sawing
blade may bend and break.
- Switch the device off immediately
if the sawing blade jams. Spread
the saw cut out and pull the blade
out carefully.
- Always stand to the side of the
saw when working.
- Always make sure that the work-
place is well ventilated.
- Avoid over-stressing the device
while working.
Conventional sawing:
1. Turn the device on. Before switching the
device on, ensure it is not in contact with
the work piece.
2. Place the base plate on the work piece.
3. Cut with a uniform forward motion. You
can saw horizontally (see
), diago-
nally or vertically (see
).
4. After completion of the work, rst re-
move the blade from the saw cut and
then switch the device off.
Plunge sawing:
Plunge cuts are technically more demanding
and harbour a greater risk. Only perform this
work if you are familiar with this technique.
Plunge cuts may only be car-
ried out in soft materials such
as wood or plasterboard and
with short blades (max. length
150 mm). There is a risk of
kickback and personal injury.
1. Place the front edge of the base plate (2)
on the work piece so that the saw blade
(1) does not touch the work piece.
2. Turn the device on and let the saw blade
(1) slowly plunge into the work piece.
3. When the work piece depth has been
cut through, continue sawing as usual.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273479 PSSA 18 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273479 PSSA 18 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 273479 PSSA 18 A1

Parkside IAN 273479 PSSA 18 A1 User Manual - French, Italian, Portuguese, Spanish - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info