745529
11
Zoom out
Zoom in
Previous page
1/70
Next page
8 
GB
IE
PHKS 1350 B2
Initial operation
The PHKS 1350 B2 circular saw has Intelligent
Power Control. This automatic power delivery
system ensures that for a particular speed range
the power output remains constant when working
on harder and more resistant materials.
Fitting/changing the saw blade
NOTE
All blades used should conform to EN 847-1.
Always pull out the plug from the mains before
changing the saw blade
!
1. Set the cutting depth (using the locking screw )
to the minimum position, 0 mm.
2. Swing the blade guard back using the release
lever and put the device down.
3. Press the spindle lock button
(until it engages)
and use the Allen key to release the clamping
screw/washer . Now remover the clamping
screw/washer and the clamping flange
(see also Fig. A).
Fig. A: Changing the saw blade
4. Remove saw blade .
5. Fitting a saw blade
is carried out in the
reverse order.
6. Press the spindle lock button (until it engages)
and use the Allen key to tighten the clamping
screw/washer .
WARNING!
The arrow on the saw blade
must corre-
spond to the arrow showing the direction of
rotation (running direction shown on the
device).
Ensure that the saw blade
is suitable for the
rotational speed of the tool.
Mounting/setting the guide fence
Loosen the wing screw and insert the guide
fence
into the guide fence slot .
Set the desired cut width with the help of the
scale on the guide fence and the marking
arrow in the base plate (see also Fig. B).
0
45
Fig. B: Cutting width 3 cm
Retighten the wing screw .
Connecting the sawdust extraction
appliance
Attach the adapter for dust extraction to the
chip ejector .
Connect an approved dust and chip extraction
device.
Operation
Switching on and off
Switching on:
Push the safety lock-out to the left or right
and keep it pressed.
Press the ON/OFF switch . Once the saw is
running you can release the safety lock-out .
Switching off:
Release the ON/OFF switch
.
Setting the cutting angle
You can select the cutting angle with the help of the
cutting angle scale .
Release the wing screw on the cutting angle
preselector
, set the desired angle on the
cutting angle scale and then re-tighten the
wing screw.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273331 PHKS 1350 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273331 PHKS 1350 B2 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info