745330
6
Zoom out
Zoom in
Previous page
1/80
Next page
6 GB/IE
Introduction / General power tool safety warningsIntroduction
Precision Multi-Grinder PFBS 160 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de
scribed
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Intended use
The precision multi-grinder, hereafter also referred
to as tool, is intended for drilling, milling, engraving,
polishing, cleaning, sanding, and cutting wood,
metal, plastic, ceramics or masonry in dry areas.
Any other uses, and / or modifications to the tool
are considered improper use and may result in seri-
ous hazards. Not for commercial applications.
Features
Precision Multi-Grinder:
1
ON / OFF switch
2
Mains lead
3
Metal bracket
4
Louvres
5
Union nut
6
Clamping nut
7
Collet 3.2 mm (pre-assembled)
8
Grip collar with LED light
9
Spindle lock button
10
Carbon brushes cover
11
Variable speed control
Accessories (see Fig. A):
12
Locking screw
13
Base assembly
14
Flexible shaft
14 b
Union nut (Flexible shaft)
15
Collet chuck
16
Stand support
17
Stretch stand
18
Clamp
Accessory kit (42 pieces) (see Fig. B):
19
6 Cutting discs
20
2 Grinding discs, abrasive
21
1 Brick
22
3 Polishing attachments
23
5 Sanding belts
24
1 Sanding belt clamping mandrel
25
1 Combination wrench
26
1 Collet 2.4 mm
27
1 Metal brush
28
2 Plastic brushes
29
1 Clamping mandrel for cut-off / grinding discs
30
1 Drill bit
31
1 Milling bit
32
1 Clamping mandrel for polishing attachments
33
2 Engraving bits
34
5 Grinding bits, abrasive
35
8 Cutting discs
36
LED light ON / OFF switch
Scope of delivery
1 Precision Multi-Grinder PFBS 160 A1
1 Plastic case
1 Flexible shaft
1 Stretch stand
1 Clamp
1 Base assembly
1 Grip collar with LED light
1 Accessory kit (42 pieces)
1 Set of operating instructions
Technical Data
Rated power input: 160 W
Voltage: 230–240 V∼, 50 Hz
Idle speed: n 10,000–40,000 min
-1
Drill bit
diameter
: max. ø 3.2 mm
Disc: max. ø 25 mm
Protection class: II /
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273280 PFBS 160 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273280 PFBS 160 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 273280 PFBS 160 A1

Parkside IAN 273280 PFBS 160 A1 User Manual - French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info