745341
5
Zoom out
Zoom in
Previous page
1/74
Next page
2
PTS 500 A1
GB
IE
PLUNGE SAW PTS 500 A1
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation on safety, usage and disposal. Before
using the product, familiarise yourself with all hand-
ling and safety guidelines. Use the product only as
described and for the range of applications specified.
Please also pass these operating instructions on to
any future owner.
Intended use
The appliance is primarily designed for sawing
longitudinal and cross cuts in a plunge saw cut into
firmly supported solid wood, chip board, plywood,
aluminium, tiles, stone, plastics, and lightweight
construction materials. Please note that the pre-
assembled saw blade is only suitable for use with
wood. Any other usage of or modification to the
appliance is considered improper and carries the
risk of serious personal injury. Not for commercial
use.
Features
Mechanical plunge lock
Power On / control lamp
Power cord
Ventilation slits
Cover for carbon brushes
ON / OFF switch
Cutting depth setting
7a
Dial for cutting depth
Markings for cut length
Base plate
Rip fence slot
Rip fence
11a
Screw for rip fence
Viewing window for cutting line
Connection to dust extraction
Spindle lock
Allen key
Saw blade
Clamping flange
Clamping screw and washer
Suction hose
HW circular saw blade Z85 / 30
Diamond-coated cutting saw blade Z85VR
HS circular saw blade Z85 / 36
Package contents
1 plunge saw PTS 500 A1
1 HW circular saw blade Z85 / 30
1 diamond-coated cutting saw blade Z85VR
1 HS circular saw blade Z85 / 36
1 rip fence
1 suction hose
1 Allen key
1 carrying case
1 set of operating instructions
Technical data
Nominal power: 500 W
Rated voltage: 230 V
~
, 50 Hz
Idle speed: n
0
4500 min
-1
Max. cutting depth: 25 mm
Protection class: II /
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the power
tool is typically as follows:
Sound pressure level: 82 dB(A)
Sound power level: 93 dB(A)
Uncertainty K: 3 dB
Wear hearing protection!
Weighted acceleration, typically:
Hand/arm vibration a
h
= 2.266 m/s
2
Uncertainty K = 1.5 m/s
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 273278 PTS 500 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273278 PTS 500 A1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info