Manual Parkside IAN 273271 PWP 90 B2 (page 8 of 46) (English, German, Dutch, French)

745340

Zoom out

Zoom in

1/46

GB IE

• Do not use the power tool if the

switch does not turn it on and off.

Any power tool that cannot be controlled

with the switch is dangerous and must be

repaired.

• Disconnect the plug from the po-

wer source and/or the battery

pack from the power tool before

making any adjust -ments, chan-

ging accessories, or storing power

tools. Such preventive safety measures

reduce the risk of starting the power tool

accidentaIly.

• Store idle power tools out of the

reach of children and do not al-

low persons unfamiliar with the

power tool or these instructions to

operate the power tool. Power tools

are dangerous in the hands of untrained

users.

• Maintain power tools. Check for

misalignment or binding of mo-

ving parts, breakage of parts

and any other condition that may

affect the power tool’s operation.

If damaged, have the power tool

repaired before use. Many accidents

are caused by poorly maintained power

tools.

• Keep cutting tools sharp and

clean. Properly maintained cutting tools

with sharp cutting edges are less Iikely to

bind and are easier to control.

• Use the power tool, accessories

and tool bits etc. in accordance

with these instructions, taking into

account the working conditions

and the work to be performed.

Use of the power tool for operations diffe-

rent from those intended could result in a

hazardous situation.

Service:

• Have your power tool serviced by

a qualied repair person using

only identical replacement parts.

This will ensure that the safety of the pow-

er tool is maintained.

Operation

Caution! Risk of injury!

- Always remove the mains plug

before working on the tool.

Tighten cover on the

polishing disc

1. Align the polishing disc (3) upwards.

2. Using both hands, grab hold of a tow-

elling cover (5) or a synthetic fur cover

(4) and expand the elastic band out-

wards.

3. Put the cover (4/5) on a part of the

polishing disc (3) over the edge of the

polishing disc. Pull the cover around the

edge.

4. Fit the cover (4/5) in centrally and tight-

ly around the polishing disc (3).

Switching on and off

Make sure that the power supply

voltage matches the voltage rating

indicated on the device‘s type

plate.

Connect the machine to the power

supply.

1. To switch on, tilt the on/off switch (2)

to position „I“, the device turns on.

2. To switch off, tilt the on/off switch (2)

to position „0“, the device turns off.

3. Firmly hold the device with both hands

on the handle (1).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 273271 PWP 90 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 273271 PWP 90 B2 Manual

Product: