745342
5
Zoom out
Zoom in
Previous page
1/44
Next page
2
PFS 710 C2
GB
IE
SABRE SAW PFS 710 C2
Introduction
Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important in-
formation on safety, usage and disposal. Before
using the product, familiarise yourself with all oper-
ating and safety instructions. Use the product only
as described and for the specified areas of appli-
cation. Please also pass on these operating instruc-
tions to any future owner.
Intended use
The appliance with a fixed hinge is designed for
sawing, cutting to length and adapting wood,
plastics and construction materials. The sabre saw
is suitable for rough sawing work, straight and
curved cuts and cuts off surfaces flush. Follow the
information concerning saw blades and practical
advice on sawing. Any other uses of or modifica-
tion to the appliance is deemed to be improper
and carries the risk of serious personal injury. The
manufacturer accepts no responsibility for damage
attributable to misuse. The appliance is not meant
for commercial use.
Features
Stroke rate adjusting wheel
Locking switch
ON / OFF switch
Handle
Footplate
Saw blade
Quick-release chuck
Working light
Locking lever for footplate
Cover for carbon brushes
Release button
Saw blade for wood
Bimetal saw blade
Package contents
1 sabre saw PFS 710 C2
1 saw blade for wood HCS 152 mm
1 bimetal saw blade 152 mm
1 operating manual
Technical data
Rated voltage: 230 V
~
, 50 Hz
(Alternating current)
Nominal power input: 710 W
Nominal idle speed: n
0
0 - 2800 min
-1
Stroke length: 20 mm
Max.
cutting performance: Wood 160 mm
Aluminium 18 mm
Metal 8 mm
Sawblade mount:
1
/
2
“ (12.7 mm)
Protection class: II /
Noise emission value:
Noise measurement value determined in accord-
ance with EN60745. The A-rated noise level of
the power tool is typically as follows:
Sound pressure level: L
PA
= 91 dB (A)
Uncertainty: K = 3 dB (A)
Sound power level: L
WA
= 102 dB (A)
Uncertainty: K = 3 dB (A)
Wear ear protection!
Vibration values (vector total of three directions)
determined in accordance with EN 60745:
Vibration emission value:
Cutting boards: a
h,B
= 18.6 m/s
2
Uncertainty: K = 1.5 m/s
2
Cutting wooden beams: a
h,WB
= 17.6 m/s
2
Uncertainty: K = 1.5 m/s
2
NOTE
The vibration level specified in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specified in EN 60745 and can be used to
make equipment comparisons. The specified
vibration emission value can also be used to
make an initial exposure estimate.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 272950 PFS 710 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 272950 PFS 710 C2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info