745535

Parkside IAn 270853 PMGS 12 C3 Manual

42
Zoom out
Zoom in
Previous page
1/48
Next page
PMGS 12 C3
GB 
│
 39 ■
Using an accessory tool with a mandrel :
NOTE
► Use the screwdriver side of the combination
key
to undo and tighten the screw on the
mandrel
.
♦ Insert the mandrel
into the power tool as
described.
♦ Use the combination key
to undo the screw
on the mandrel .
♦ Insert the desired accessory tool between the
two washers on the screw.
♦ Use the combination key
to tighten the screw
on the mandrel .
Switching on and off/setting speed
range
Switching on/setting the speed range:
♦ Connect the plug
to the mains adapter
by plugging it into the plugging device
(see fig. A).
♦ Connect the appliance to the power supply
by inserting the power plug into the socket.
♦ Push the ON/OFF switch
to a position
between "5000" and "20000".
Switching off:
♦ Push the ON/OFF switch
to the "OFF"
position.
Using the grip ring with LED light
♦ Hold down the spindle lock and screw the
tensioning nut anticlockwise off the thread.
♦ Release the spindle lock
.
♦ Then screw the grip ring
anticlockwise off
the thread.
♦ Screw the grip ring with LED
clockwise onto
the screw thread.
♦ Hold down the spindle lock
and screw the
tensioning nut clockwise onto the thread.
♦ Release the spindle lock
.
♦ Move the ON/OFF switch of the LED light
to
the position "I" to switch it on.
♦ Move the ON/OFF switch of the LED light
to
the position "0" to switch it off again.
♦ Proceed in reverse order to replace the grip
ring
.
Notes on material processing/tools/
speed range
■ Use the milling bits for working on steel and
iron at maximum speed.
■ Calculate the rotational speed range for work-
ing on zinc, zinc alloys, aluminium, copper and
lead by trying it out on test pieces.
■ Use a low rotational speed for work on plastics
and materials with a low melting point.
■ Use a high rotational speed for working on
wood.
■ Carry out cleaning, polishing and buffing work
in the middle range.
The following are recommendations only and not
binding. When carrying out practical work, carry
out your own tests to see which tool and which set-
tings are ideal for the material you are working on.
Setting a suitable rotational speed
Number on the
speed control
Material
being worked
5000 Plastics and materials
with a low melting
point
9000 Stone, ceramics
13000 Soft wood, metal
17000 Hardwood
20000 Steel
… 42 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAn 270853 PMGS 12 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAn 270853 PMGS 12 C3 in the language / languages: French as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAn 270853 PMGS 12 C3

Parkside IAn 270853 PMGS 12 C3 User Manual - English, German, Dutch, Danish - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info