745535
14
Zoom out
Zoom in
Previous page
1/60
Next page
PMGS 12 C3
GB
IE
 11
Tips and tricks
If you exert too much pressure, the fitted tool can
break and/or the workpiece could be damaged.
You will achieve optimum working results by
moving the tool over the workpiece at a steady
speed and while exerting light pressure.
When carrying out cutting work, hold the appli-
ance firmly with both hands.
Observe the data and the information in the
table to prevent the end of the spindle from
touching the perforated base of the grinding
tool.
Maintenance and cleaning
The appliance is maintenance-free.
Remove all dirt from the appliance. Use a dry
cloth to do this.
WARNING!
Have the power tool repaired by the Ser-
vice centre or a qualified electrician and
only using genuine replacement parts. This
will ensure that the safety of the appliance is
maintained.
WARNING!
Always ensure that the power plug or
the mains cable is replaced only by the
manufacturer of the appliance or by an
approved customer service provider. This
will ensure that the safety of the appliance is
maintained.
NOTE
Replacement parts not listed (such as carbon
brushes, switches and mains adapter) can be
ordered via our service hotline.
Disposal
The packaging is made from environ-
mentally friendly material and can
be disposed of at your local recycling
plant.
Do not dispose of power tools in
your normal household waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner.
Please consult your local authorities regarding
suitable disposal of worn out power tools.
Batteries should not be disposed of
with normal household waste.
Consumers are legally obliged to dispose of used
batteries at a collection point in their town/district
or at a retail store. This obligation is intended to
ensure that batteries are disposed of in an environ-
mentally responsible manner. Dispose of batteries
only when they are fully discharged.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAn 270853 PMGS 12 C3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAn 270853 PMGS 12 C3 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAn 270853 PMGS 12 C3

Parkside IAn 270853 PMGS 12 C3 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info