Manual Parkside IAn 270853 PMGS 12 C3 (page 8 of 60) (English, German, Dutch, Danish)

745535

Zoom out

Zoom in

1/60

PMGS 12 C3

│

5 ■

Safety instructions for all applications

General safety instructions for grinding, sand-

paper sanding, working with wire brushes,

polishing, milling and abrasive cutting:

a) This power tool is intended for use as a grinder,

sandpaper sander, wire brush, polisher, milling

machine and abrasive cutting appliance.

Please follow all safety instructions, instruc-

tions, diagrams and data that you receive

with the appliance. If you do not observe the

following instructions, this can lead to electrical

shock, ﬁre and/or serious injuries.

b) Do not use any accessories that have not been

provided or recommended by the manufac-

turer for this power tool. Just because you can

attach the accessories to your power tool, does

not ensure they are safe to use.

c) The permissible speed of the accessory tool

used must be at least as high as the maximum

speed speciﬁed for the power tool. Accessories

that rotate faster than the permissible rate can

break and throw pieces into the air.

d) The external diameter and thickness of the

accessory tool used must comply with the

dimensions of the power tool. Incorrectly

dimensioned accessory tools cannot be suﬃ-

ciently shielded or controlled.

e) Grinding discs, sanding drums or other ac-

cessories must match the grinding spindle

or collet chuck of your power tool exactly.

Accessory tools which do not ﬁt precisely into

the take-up of the power tool will rotate un-

evenly, vibrate severely and can lead to a loss

of control.

f) Discs, grinding cylinders, cutting tools or other

accessories mounted on a mandrel must be

completely inserted in the collet or chuck.

Any "protrusion" or exposed parts of the

mandrel between the grinding tool and the

collet or chuck must be kept to a minimum.

If the mandrel is not suﬃciently tightened or the

grinding tool protrudes too far, the tool could

come loose and been thrown out at high speed.

g) Never use damaged accessory tools. Before

each use, check accessory tools such as grind-

ing discs for chips or cracks, sanding drums

for cracks, wearing or excessive wear and tear

and wire brushes for loose or broken wires.

If the power tool or the accessory tool in use

is dropped, check to see if it is damaged or

use an undamaged accessory tool. When you

have checked and inserted the accessory tool,

ensure that you and any other people in the

vicinity remain outside of the range of the

rotating accessory tool and allow the tool

to rotate at maximum speed for one minute.

Damaged accessory tools usually break during

this test period.

h) Wear personal protective equipment.

Depending on the application, ensure that

you use full face protection, eye protection

or goggles. If required, use a dust mask, ear

protectors, protective gloves or special apron

to protect you from grindings and material

particles. Eyes should be protected from ﬂying

debris that may be generated during certain

applications. Dust or ﬁlter masks must ﬁlter any

dust created by the application. If you are ex-

posed to loud noise for any length of time, you

may suﬀer hearing loss.

i) Ensure that other people remain at a safe dis-

tance to your workspace. Anyone who enters

the workspace must wear personal protective

equipment. Fragments of the workpiece or

broken accessory tools can ﬂy oﬀ and cause

injury – even outside the immediate working

area.

j) Hold the power tool by the insulated gripping

surfaces, when performing an operation

where the accessory tool may contact hidden

wiring or its own cord. Contact with a live cable

can also make metal parts of the appliance live

and could result in an electric shock.

k) Always hold the power tool ﬁrmly. When

running up to full speed, the torque of the

motor can cause the power tool to twist.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAn 270853 PMGS 12 C3 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAn 270853 PMGS 12 C3

Parkside IAn 270853 PMGS 12 C3 User Manual - French - 48 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAn 270853 PMGS 12 C3 Manual

Product: