745472
6
Zoom out
Zoom in
Previous page
1/57
Next page
PSTD 800 B1
2 
GB
IE
JIGSAW PSTD 800 B1
Introduction
Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
This appliance is suitable for straight and curved
cutting as well as mitre cuts of up to 45° on angular
workpieces made of plastic, wood or light metal. This
appliance is exclusively intended for private use in
dry indoor spaces. Observe the guidelines on saw
blade types. Any other usage of or modification to the
appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer accepts
no responsibility for damage(s) attributable to misuse.
Features
Stroke rate adjusting wheel
ON/OFF switch lock button
ON/OFF switch
Housing
Power cable
Reducer
Extraction nozzle
Footplate
Sliding shoe (removable)
Switch for sawdust blower
Pendulum stroke switch
Rip fence
Guide roller
Saw blade
Insertion openings (each incl. locking screw)
Protective bracket
Blade guard
Quick-release chuck
ON/OFF switch laser/working light
Clamping screws
Toothing
Hex key
Saw blade (for woodwork)
Saw blade (for woodwork)
Saw blade (for metalworking)
Adjusting screw
Splintering device
Notch
Package contents
1 jigsaw, incl. extraction nozzle
1 reducer
1 rip fence
3 saw blades for woodwork
1 saw blade for metalworking
1 Hex key
1 Operating instructions
Technical details
Jigsaw: Parkside PSTD 800 B1
Rated voltage: 230 V ∼ 50 Hz
(alternating current)
Rated power
consumption: 800 W
Idling stroke rate: n
0
0 - 3100 rpm
Cutting capacity: Wood/metal: 80/8 mm
Pendulum stroke: 3 stages and fine-cut setting
Oblique section: 0°/15°/30°/45° left/
right
Protection class: II /
(double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the
power tool is typically as follows:
Sound pressure level: L
pA
= 93 dB (A)
Uncertainty: K
pA
= 3 dB
Sound power level: L
WA
= 104 dB (A)
Uncertainty: K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
(Vector total of three directions) determined in
accordance with EN 60745:
Sawing of chipboard: a
h,B
= 7.8 m/s
2
Uncertainty K = 1.5 m/s
2
Sawing of metal plate: a
h,M
= 9.8 m/s
2
Uncertainty K = 1.5 m/s
2
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270827 PSTD 800 B1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270827 PSTD 800 B1 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info