745334
9
Zoom out
Zoom in
Previous page
1/76
Next page
GB
IE
6
PNKP 105 A1
Operation
Prepare the area to be glued:
Do not use any flammable solvents to clean the area.
The room temperature and the temperature of the material to be
glued may not be colder than +5 °C and no warmer than + 50 °C.
The area must be clean, dry and grease free.
Smooth out the surface before gluing.
Warm up cooled material such as steel for a better join.
1. Fold the stand leg
out. Set the device aside.
2. Put a glue cartridge in the feed canal
.
3. Let the device warm up for 5 minutes. The device is now ready
to use.
Gluing:
Press the feed trigger
to start and control the flow of glue.
1. Apply the glue in dots. Apply the glue in a zigzag line on flexible
material e.g. textiles.
2. Press both glued together work-pieces together immediately
after applying the glue for approx. 30 seconds. The glued area
is resilient after approx. 5 minutes.
3. Place the glue gun on its stand leg
between gluing.
Switching the device off:
Pull the mains plug from the socket.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270716 PNKP 105 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270716 PNKP 105 A1 in the language / languages: English, German, Dutch, French, Swedish as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info