Manual Parkside IAN 270701 PABS 16 A1 (page 11 of 54) (English, German, Dutch, Danish, Swedish)

745231

Zoom out

Zoom in

1/54

PABS 16 A1

Tips and tricks

Tip! This symbol indicates proper

behaviour!

♦ Before operation, check whether the screw or

drill bit is correctly positioned, i.e. centred in

the drill chuck.

♦ Screw bits are labelled according to their di-

mensions and their shape. If you are uncertain,

always check whether the bit ﬁts tightly in the

screw head without any free play.

Torque:

♦ Smaller screws/bits can be damaged if you set

the torque or rotational speed too high.

Hard screw joints (in metal):

♦ Particularly high torques occur, for example, in

metal screw joints made using drive sockets.

Select a low rotational speed.

Soft screw joints (e.g. in soft wood):

♦ Here, too, you should use a low rotational

speed, e.g. to avoid damaging the surface of

the wood upon contact with the bolt head.

Use a countersink.

When drilling in wood, metal and other mate-

rials, observe the following:

♦ Use a high speed for drill bits with small diam-

eter and a low speed for drill bits with large

diameter.

♦ Select a low speed for hard materials and a

high speed for soft materials.

♦ Secure or fasten the workpiece in a clamp or

vice (if possible).

♦ Mark the location where you want to drill using

a centre punch or nail. Select a low rotational

speed when starting.

♦ Pull the rotating drill bit from the hole repeatedly

to remove dust and chips and clear the hole.

Drilling in metal:

♦ Use a metal drill (HSS). For optimum results,

you should cool the drill bit with cutting oil.

Metal drill bits can also be used to drill into

plastics. Start with a 3 mm diameter drill bit

and then increase the size until the desired

hole diameter is achieved.

Drilling in wood:

♦ Use a wood drill with a lathe centre; for deep

holes, use an "auger bit"; for large-diameter

holes, use a Forstner bit. Small screws can be

screwed directly into soft wood.

Maintenance and cleaning

WARNING! RISK OF INJURY! Always

switch the appliance oﬀ and remove

the battery before carrying out any

work on the appliance.

The cordless screwdriver is maintenance-free.

■ The appliance must always be kept clean, dry

and free from oil or grease.

■ Never allow liquids to get into the appliance.

■ Use a soft, dry cloth to clean the housing.

Never use petrol, solvents or cleansers which

can damage plastic.

■ If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level is

between 50% and 80%. The optimum storage

climate is cool and dry.

NOTE

► Replacement parts not listed (such as carbon

brushes, switch) can be ordered via our

service hotline.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270701 PABS 16 A1 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 0,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 270701 PABS 16 A1

Parkside IAN 270701 PABS 16 A1 User Manual - French - 44 pages

Parkside IAN 270701 PABS 16 A1 User Manual - Italian, Portuguese, Spanish - 54 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 270701 PABS 16 A1 Manual

Product: