Manual Parkside IAN 270420 PHKSA 18 Li B2 (page 39 of 44) (French)

745234

Zoom out

Zoom in

1/44

PHKSA 18-Li B2

♦ Insert the mains plug into the mains power socket.

The red control LED lights up.

♦ The green control LED

indicates that the

charging process is complete and the battery

pack is ready.

♦ Insert the battery pack

back into the appli-

ance.

■ Never recharge a battery pack

again

immediately after rapid charging. This could

overcharge the battery pack , thus reducing

the lifespan of the battery and charger .

♦ Switch oﬀ the charger for at least 15 minutes

between successive charging sessions. Also

disconnect the power plug from the mains

power socket.

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack:

♦ Allow the battery pack to click into the

handle.

Removing the battery pack:

♦ Press the release button

and remove the

battery pack .

Checking the battery charge level

♦ Press the battery charge level button to

check the status of the battery (see also main

diagram). The status/remaining charge will be

shown on the battery display LED as follows:

♦ RED/ORANGE/GREEN = maximum charge/

power

RED/ORANGE = medium charge/power

RED = low charge – charge the battery

Checking the blade guard

♦ Pull back on the release lever for the blade

guard as far as the stop.

The blade guard

must move freely without jam-

ming and must spring back into its starting position

automatically when you let go of the release lever

for the blade guard .

Initial use

Fitting/changing the saw blade

Always remove the battery pack before changing

the saw blade !

1. Set the cutting depth (using the locking screw

)

to the minimum position, 0 mm.

2. Swing the blade guard

back using the

release lever and put the appliance down.

3. Press the spindle lock button (until it engages)

and use the Allen key to release the clamping

screw . Now remove the clamping screw

and the clamping ﬂange (see also Fig. A).

Fig. A Changing the saw blade

4. Remove

saw blade.

5. Fitting a saw blade

is carried out in the reverse

order.

6. Press the spindle lock button

(until it engages)

and use the Allen key to tighten the clamping

screw .

WARNING!

► The arrow on the saw blade

must corre-

spond to the arrow showing the direction

of rotation (running direction shown on the

appliance).

■ Ensure that the saw blade

is suitable for the

rotational speed of the tool.

Rip fence

♦ Loose the wing screw and insert the rip

fence into the rip fence slot .

♦ Set the desired cut width with the help of the

scale on the rip fence and the cut out in the

base plate

(see also Fig. B).

The right-hand recess in the base plate is for a

cutting angle of 0°. The left-hand recess in the

base plate is for a cutting angle of 45°.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270420 PHKSA 18 Li B2 in the language / languages: French as an attachment in your email.

The manual is 0,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 270420 PHKSA 18 Li B2

Parkside IAN 270420 PHKSA 18 Li B2 User Manual - English, German, Dutch, Danish - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 270420 PHKSA 18 Li B2 Manual

Product: