745234
11
Zoom out
Zoom in
Previous page
1/56
Next page
8
PHKSA 18-Li B2
GB
IE
Insert the mains plug into the mains power socket.
The red control LED lights up.
The green control LED
indicates that the
charging process is complete and the battery
pack is ready.
Insert the battery pack
back into the appli-
ance.
Never recharge a battery pack
again
immediately after rapid charging. This could
overcharge the battery pack , thus reducing
the lifespan of the battery and charger .
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
Allow the battery pack to click into the
handle.
Removing the battery pack:
Press the release button
and remove the
battery pack .
Checking the battery charge level
Press the battery charge level button to
check the status of the battery (see also main
diagram). The status/remaining charge will be
shown on the battery display LED as follows:
RED/ORANGE/GREEN = maximum charge/
power
RED/ORANGE = medium charge/power
RED = low charge – charge the battery
Checking the blade guard
Pull back on the release lever for the blade
guard as far as the stop.
The blade guard
must move freely without jam-
ming and must spring back into its starting position
automatically when you let go of the release lever
for the blade guard .
Initial use
Fitting/changing the saw blade
Always remove the battery pack before changing
the saw blade !
1. Set the cutting depth (using the locking screw
)
to the minimum position, 0 mm.
2. Swing the blade guard
back using the
release lever and put the appliance down.
3. Press the spindle lock button (until it engages)
and use the Allen key to release the clamping
screw . Now remove the clamping screw
and the clamping flange (see also Fig. A).
Fig. A Changing the saw blade
4. Remove
saw blade.
5. Fitting a saw blade
is carried out in the reverse
order.
6. Press the spindle lock button
(until it engages)
and use the Allen key to tighten the clamping
screw .
WARNING!
The arrow on the saw blade
must corre-
spond to the arrow showing the direction
of rotation (running direction shown on the
appliance).
Ensure that the saw blade
is suitable for the
rotational speed of the tool.
Rip fence
Loose the wing screw and insert the rip
fence into the rip fence slot .
Set the desired cut width with the help of the
scale on the rip fence and the cut out in the
base plate
(see also Fig. B).
The right-hand recess in the base plate is for a
cutting angle of 0°. The left-hand recess in the
base plate is for a cutting angle of 45°.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270420 PHKSA 18 Li B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270420 PHKSA 18 Li B2 in the language / languages: English, German, Dutch, Danish as an attachment in your email.

The manual is 0,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Parkside IAN 270420 PHKSA 18 Li B2

Parkside IAN 270420 PHKSA 18 Li B2 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info