745345
5
Zoom out
Zoom in
Previous page
1/76
Next page
5
GB IE
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the pa-
ckaging material correctly.
- Baseplate
- Drilling bench
- Column tube
- Motor unit
- 3 drill lifting arms
- Safety device
- Depth stop
- Drill chuck
- Drill chuck key
- Allen key
- Vice
- Mounting material
- Original instructions
Description of functions
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Off switch
2 On switch
3 Depth stop with scale
4 Drill chuck
5 Emergency stop switch
6 Drill spindle
7 Safety device
8 Gear cover
9 Hand spindle guide with
3 drill lifting arms
10 Holder for drill chuck key
11 Locking screw for gear cover
12 Clamping screws
13 Retaining screws
14 Motor unit
15 Column tube
16 3 Assembly screws
17 Baseplate
18 Angle scaling
19 Retaining screw for drilling
bench
Inclination (not visible)
20 Drilling bench
21 Vice
22 Chuck jaws
23 Vice mounting material
24 Locking handle
25 Motor side drive pulley
26 V-belt
27 Interlock switch
28 Spindle-side drive pulley
29 Drill chuck key
30 Allen key
Technical Data
Bench Drill PTBM 500 B2:
Rated input voltage
......................................230 V~, 50 Hz
Power input ............ 500 W (S2 15 min)*
Idling speed (n
0
) ......................1400 min
-1
Safety class .......................................... I
Protection category......................... IP 20
Weight ........................................ 14 kg
Drill chuck .....................3 mm bis 16 mm
Spindle stroke ..............................50 mm
Spindle speed ................500 - 2500 min
-1
Sound pressure level
(L
pA
) ................... 74,5 dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .......... 85,6 dB(A); K
WA
= 3 dB
guaranteed ...........................89 dB(A)
Vibration(a
h
)
........................... 2,39 m/s
2
K= 1,5 m/s
2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 270414 PTBM 500 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 270414 PTBM 500 B2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info