745348

Parkside IAN 115720 PBF 400 A1 Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10 GB/IE
Operation / Maintenance and cleaning / Service centre / WarrantyStart-up / Operation
Clamping / changing
the abrasive belt
RISK OF INJURY! Always un-
plug from the mains before working on the band file.
Loosen the clamping device for the abrasive belt
by moving the clamping lever
9
forward (see
Fig. B). The abrasive belt
11
can be removed.
Slide the new abrasive belt
11
through the slot
in the housing of the tool. Important: The direc-
tion of the arrow on the inside of the abrasive
belt
11
and the housing of the tool must match.
Slip the abrasive belt
11
over the rear and front
roller
15
.
Push the clamping lever
9
back into the start-
ing position.
Manually adjusting the abrasive belt:
If the path of the belt does not straighten after
switching on, it may need to be adjusted manually.
To do so, turn the adjusting screw
7
until the
abrasive belt
11
is centred.
IMPORTANT: Be sure the abrasive belt
11
does not grind into the housing. Regularly
check the path of the belt and adjust with the
adjusting screw
7
if necessary (see Fig. C).
Dust extraction
EXPLOSION HAZARD!
A special dust extractor must be used for explosive
dust / air mixtures.
FIRE HAZARD DUE TO SPARKING! Do not
use dust extraction (dust bag
5
or vacuum) when
grinding metal.
FIRE HAZARD! Fire hazard
when using electric devices with dust bag or con-
nected to a vacuum via dust extraction! Unfavourable
conditions, e.g. sparking - when grinding metal or
metal pieces in wood - wood dust inside the dust
bag (or inside the dust bag of the vacuum) can
spontaneously ignite. This can particularly occur if
the wood dust comes is mixed with paint particles
or other chemicals and the ground product is hot
after long work periods. Therefore be sure to avoid
the ground materials and the device from overheat-
ing and always empty the dust bag resp. the dust
bag of the vacuum before taking breaks.
Wear a dust
mask!
Dust extraction by dust bag (see Fig. D):
Compress the handles of the wire ring on the
dust bag
5
to make it larger.
Slip the dust bag
5
onto the adapter connec-
tion
16
.
Uninstalling / removing the dust bag:
Compress the handles of the wire ring on the
dust bag
5
to make it larger. Remove the dust
bag
5
from the device.
Adapter for external extraction
Connecting:
Place the extraction adapter
10
onto the file so
the teeth fit into the designated notches. Now
turn the extraction adapter
10
clockwise to
tighten.
Slide the hose of a reliable dust extractor (e.g.
workshop vacuum) onto the extraction adapter
10
.
Removal:
Pull the hose out of the dust extraction unit.
Turn the extraction adapter
10
counter-clock-
wise and remove from the file.
Operation
Switching on and off
When operating the device you can select between
intermittent or continuous operation:
Switching on temporary operation:
Push the ON / OFF switch
4
.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 115720 PBF 400 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 115720 PBF 400 A1 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info