745332

Parkside IAN 114254 PWS 125 B2 Manual

17
Zoom out
Zoom in
Previous page
1/122
Next page
17
IEGB
Cleaning and servicing
Pull the mains plug before any ad-
justments, maintenance or repair.
Have any work on the device
that is not described in this in-
struction guide performed by
a professional. Only use ori-
ginal parts. Allow the device
to cool off before any mainte-
nance or cleaning is underta-
ken. There is a risk of burning!
Always check the device before using it for
obvious deciencies such as loose, worn
or damaged parts, correct the positioning
of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.
Cleaning
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughly clean the device after every
use.
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.
Servicing
Replacing carbon brushes
Switch off the appliance and dis-
connect the power supply. Let the
appliance cool down.
1. Loosen the screw ( 7) of the
maintenance cover (
6).
2. Remove the maintenance cover (
6).
3. Lift the compression spring (20)
out of the groove for the spring
(22) the carbon brush (21).
4. Remove the contact plug (25) of
the contact shoe (24).
5. Pull out the brush (21) from the
guide.
6. Insert a new carbon brush (21)
into the guide.
7. Place the connector (23) in a
bow in the groove for the com-
pression spring (22) past. Lead
the connector (23) through the
side opening of the leadership.
8. Slide the contact plug (25) on
the contact shoe (24).
9. Replace the compression spring
(20) on the nut of the compressi-
on spring (22) the carbon brush
(21).
10. Reattach the screw (
7)the
maintenance cover (
6)
11. Repeat the procedure 1 to 10
on the other side of the unit. The
carbon brushes are always in
pairs to share.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Grinding discs must be dry and stored
upright and should never be stacked.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Parkside IAN 114254 PWS 125 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 114254 PWS 125 B2 in the language / languages: English, German, Dutch, Danish, Swedish as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info