Manual Parkside IAN 114252 PNTS 1400 E2 (page 8 of 72) (English, German, Dutch, Swedish)

745338

Zoom out

Zoom in

1/72

GB IE

• Switch the machine off and pull the

plug under the following circumstances:

- when you are not using the device,

- transporting it or leaving it unat-

tended;

- when you are checking the device,

cleaning it or removing blockages;

- when you are carrying out cleaning

or maintenance work or replacing

accessories;

- when the power or extension cable

is damaged; after contact with for-

eign bodies or in case of abnormal

vibration.

• Never use the mains lead to pull the

plug out of the socket or to pull the

appliance. Protect the mains lead from

heat, oil and sharp edges.

• Make sure that the mains voltage cor-

responds with the information on the

rating plate.

• Only plug the appliance into a socket

which is safeguarded by at least 16A.

• The device must only be connected to

a mains socket via a residual-current

circuit breaker (RCD) with a rated leak-

age current of not more than 30mA.

The following states how damage

to the appliance and possible in-

jury to people can be avoided:

• Ensure that the machine is correctly

assembled and the lters are in the cor-

rect position.

• Do not use without the lter. This could

damage the machine.

• Only use Spare parts and accessories

delivered and recommended by our

Service Centre (see “Spare parts/Ac-

cessories”). The use of parts by other

manufacturers immediately renders the

guarantee void.

• Only have repairs carried out at our

authorised customer service points.

• Observe the instructions for cleaning

and maintenance of the machine.

• Store the appliance in a dry place and

out of reach of children.

Assembly

Pull out the mains plug.

Danger of electric shock.

The appliance is supplied with the

folded lter (

23) tted.

1. Place the 4 steering castors (11) onto

the mounts on the stainless steel con-

tainer (9). Attach each steering castor

with a crosshead bolt (11a).

2. Push the bow handle (1) onto the two

bow handle tie bars (2) and screw it in

place with 2 crosshead bolts (1a).

3. Place the motor head (3) on the stain-

less steel container (9).

4. Close the stainless steel container by

folding up the bow handle and xing

it with the locking levers (14). everal

positions are possible for the bow han-

dle.

The locking lever must be tightened so

that a tensioning with medium force

can be carried out. You can set the ten-

sion by turning the locking lever:

- Tighten: turn clockwise

- Loosen: turn anti-clockwise.

5. Place the carrying handle (4) on the

motor head (3) and screw it on tight

with 2 crosshead screws (4a).

6. Fit the accessories:

- Connect the suction hose (19).

- Fit the handle (20)

- Fit the telescopic suction pipe (17).

(Press the knob on the telescopic suc-

tion pipe in the

direction and

separate to the desired length).

- Fit the desired nozzle (25/26).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Parkside IAN 114252 PNTS 1400 E2 in the language / languages: English, German, Dutch, Swedish as an attachment in your email.

The manual is 3,58 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Parkside IAN 114252 PNTS 1400 E2 Manual

Product: